For the ones who are complaining about force restarts and freeze i will tell you my experience, i had the same problems and maybe this will help you to:
I have 5 sapphire rx580 8GB and 1 msi rx580 gaming edition 8GB, windows 10 64bit ver 1703
1. Until robin hood drivers i didn't have any problems with claymore or drivers or freeze. After installing this drivers i could not overclock my cards from claymore so i needed to tweak them with Afterburner and BIOS edits, but again i could stil function properly
2. When the official drivers from amd (still beta, but from official site) where launched i installed them and every 2-3 days I needed to reboot my sister. No matter what i have tried: OC tweets (even with the same settings which previously worked), I`ve seen the spikes in energy drawn by the sistem like Claymore said is causing the freeze.
3. Tha final step to create a stable sistem:
- uninstall drivers with AMD wizard which installs also the 17.11.1 drivers. I didn't need to uninstall them from safe mode
- patch the drivers
- uninstall Afterburner
- installed Claymore 10.1 with same Config file which worked with Robin Hood drivers
- set every card in Compute mode, reboot the sistem and everything was set.
I already have a week without freeze or reboots.
Claymore could set everything except the fan speed of my MSI card: cclock, mclock, cvddc, mvddc
With 17.11.1 drivers i observe also a 50-60w economy on my sistem consumed
I hope this will help also others!
Hi! Well, i think im doing something wrong .
Ive been using AB ( 4.4) to overclock and undervolt GPUs koz i couldnt undervolt it in CM. If in CM i set -cvddc lets say 980 , ok its about 975 ( says GPUZ) , set to 900 , its 990, set to 930 , its 985 .
I thought its is fixed in CM 10 + 17.11.1 combo . But not, i cant set desired voltage via CM.
What am I doing wrong ?