I just noticed that Bitmain has released two GPU miner models at their Chinese section of the web page.
Bitmain G1:
https://shop.bitmain.com/productDetail.htm?pid=00020170911150755910CdnPsxhK06F9https://i.imgur.com/lmbFaAs.jpgG1 specifications:
1. CPU: Inter Broadwell-u 3215 or 3205
2. Memory: 4GB SO-DIMM, DDR3 / L-1600
3. Hard disk: 1 x Msata 64G SSD
4. Ethernet: 1 x 10M / 100M / 1000Mbps (Intel I210-AT)
5. USB interface: 2 x USB2.0
6. Display interface: 1 x HDMI
7. Graphics card: 8 x NVIDIA GeForce GTX1060
8. Calculus: ETH Hash Rate: 200MHash ± 10%
9. Carton size: 530mm x 320mm x 160mm
10. Weight: 12.5Kg (without power)
Precautions:
1. Chassis deformation or heat sink off, please do not power, contact after-sales processing.
2. It is recommended to use ants pool (
www.antpool.com )
3. It is recommended to use APW3 ++ power supply
Bitmain G2:
https://shop.bitmain.com/productDetail.htm?pid=00020170911160838626L7JGrkzY06C1https://i.imgur.com/nKVHYg2.jpgG2 specifications:
1. CPU: Inter Skylake-s G3900-LGA1151, PCH-B150
2. Memory: 8GB UDIMM, DDR4 -2133
3. Hard disk: 1 x 2.5inch Sata 128G SSD
4. Ethernet: 1 x 10M / 100M / 1000Mbps (Intel I210-AT)
5. USB interface: 2 x USB3.0
6. Display interface: 1 x VGA
7. Graphics card: 8 x AMD Radeon RX570, GDDR5
8. Calculus: ETH Hash Rate: 220MHash ± 10%
12. Carton size: 555mm x 445mm x 132mm
13. Weight: 15Kg (including power)
Precautions:
1. Chassis deformation or heat sink off, please do not power, contact after-sales processing.
2. Can not use two power strips with the same operator board.
3. Suggested use of ants pool (
www.antpool.com )
Any thoughts about these GPU card miners?
I was pretty surprised to suddenly find these.
I prefer to build my own and these depend on price if thye are cheap from China they will sell
