Version 1.1.6.0 is available and adds support for 64-bit miners and FPGAs/ASICs. I do not have any FPGA or ASIC devices yet, so the support is based on device test results that users had sent me. Most of these were all one type of device and did not include GPUs, so if you experience issues please run the device test at the bottom of the FPGA or ASIC tab and email me the results.

I rebuilt the OpenCL.NET library so if you are copying files over a previous version, make sure the new OpenCLNET.dll gets copied. CGWatcher will now run as a 32-bit application in 32-bit Windows, and a 64-bit application in 64-bit Windows. I don't have any 32-bit systems to test on, so if you experience problems with 32-bit Windows please let me know.

See the original post or ChangeLog for other changes.


ypsylon: The new version should work with BFGMiner x64.


qiuness: I'm not sure. You can try entering a specific value in the textbox instead of using the slider. The slider calculates a max RPM based on the current RPM and current %, so it fluctuates depending on these two values and may not be accurate. It may be a value higher than the fan allows? I'd try a lower number like 2500, or 2000 and see if those work. The command it sent to the miner to change the fan speed is correct, but the value may need to be lowered.



af_newbie: Maybe... I bet it would still have more users than akbash. Maybe if you spent more time working on your program and less time posting in this thread, people would actually use it. LOL