After changing the low speed fan(2000rpm), the speed can not be recognized
Are you sure you flashed the custom firmware (from the start page), as I removed this fan speed check.
To check if you flashed the custom firmware: go to the minerAdvanced.cgi page and you should see the voltage control settings
I flashed the custom firmware .it's from upgrade to running (flash image )
Did I choose the wrong one? It should be run from there？
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 65280
[ 0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 64768 pages, LIFO batch:15
[ 0.000000] AM335X ES1.0 (neon )
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0933000 s9408 r8192 d15168 u32768
[ 0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc:
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
[ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] allocated 524288 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 255MB = 255MB total
[ 0.000000] Memory: 238676k/238676k available, 23468k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0612cf0 (6188 kB)
[ 0.000000] .init : 0xc0613000 - 0xc06554c0 ( 266 kB)
[ 0.000000] .data : 0xc0656000 - 0xc06cc020 ( 473 kB)
[ 0.000000] .bss : 0xc06cc020 - 0xc0725e3c ( 360 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000356] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[ 0.015440] pid_max: default: 32768 minimum: 301
[ 0.015671] Security Framework initialized
[ 0.015766] Mount-cache hash table entries: 512
[ 0.024611] Initializing cgroup subsys cpuacct
[ 0.024645] Initializing cgroup subsys memory
[ 0.024707] Initializing cgroup subsys blkio
[ 0.024841] CPU: Testing write buffer coherency: ok
[ 0.025415] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.025493] Setting up static identity map for 0x8038c820 - 0x8038c86c
[ 0.026820] Brought up 1 CPUs
[ 0.026844] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[ 0.028141] devtmpfs: initialized
[ 0.092552] pinctrl core: initialized pinctrl subsystem
[ 0.092767] rstctl core: initialized rstctl subsystem
[ 0.093266] regulator-dummy: no parameters
[ 0.093835] NET: Registered protocol family 16
[ 0.094538] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.104201] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[ 0.104386] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.105473] platform 49000000.edma: alias fck already exists
[ 0.105507] platform 49000000.edma: alias fck already exists
[ 0.105535] platform 49000000.edma: alias fck already exists
[ 0.106682] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.106864] OMAP GPIO hardware version 0.1
[ 0.108275] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.109594] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.110905] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.111537] of_get_named_gpio_flags exited with status 52
[ 0.111568] gpio-rctrl rstctl.3: loaded OK
[ 0.116679] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[ 0.119884] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.122078] cpsw.0: No hwaddr in dt. Using 50:33:8b:32:b7:da from efuse
[ 0.122109] cpsw.1: No hwaddr in dt. Using 50:33:8b:32:b7:dc from efuse
[ 0.137650] bio: create slab at 0
[ 0.149792] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 0.150032] of_get_named_gpio_flags: can't parse gpios property
[ 0.150326] vmmcsd_fixed: 3300 mV
[ 0.153441] SCSI subsystem initialized
[ 0.153897] usbcore: registered new interface driver usbfs
[ 0.154009] usbcore: registered new interface driver hub
[ 0.154340] usbcore: registered new device driver usb
[ 0.156452] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[ 0.156486] omap_i2c 4819c000.i2c: unable to select pin group
[ 0.156683] media: Linux media interface: v0.10
[ 0.156778] Linux video capture interface: v2.00
[ 0.156896] pps_core: LinuxPPS API ver. 1 registered
[ 0.156912] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <
giometti@linux.it>
[ 0.157632] Advanced Linux Sound Architecture Driver Initialized.
[ 0.158824] Switching to clocksource gp_timer
[ 0.176819] NET: Registered protocol family 2
[ 0.177811] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.177900] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[ 0.177990] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.178082] TCP: reno registered
[ 0.178109] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.178155] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.178648] NET: Registered protocol family 1
[ 0.179238] RPC: Registered named UNIX socket transport module.
[ 0.179260] RPC: Registered udp transport module.
[ 0.179274] RPC: Registered tcp transport module.
[ 0.179288] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.179676] Trying to unpack rootfs image as initramfs...
[ 1.942861] Freeing initrd memory: 12240K
[ 1.943513] CPU PMU: probing PMU on CPU 0
[ 1.943547] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 1.944168] omap2_mbox_probe: platform not supported
[ 1.947924] VFS: Disk quotas dquot_6.5.2
[ 1.948257] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.949624] NFS: Registering the id_resolver key type
[ 1.949717] Key type id_resolver registered
[ 1.949734] Key type id_legacy registered
[ 1.949800] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 1.950340] msgmni has been set to 490
[ 1.953178] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.953204] io scheduler noop registered
[ 1.953220] io scheduler deadline registered
[ 1.953268] io scheduler cfq registered (default)
[ 1.957237] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.959809] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[ 1.960108] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[ 2.620950] console [ttyO0] enabled
[ 2.625481] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[ 2.634190] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[ 2.642827] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[ 2.651486] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[ 2.660466] [drm] Initialized drm 1.1.0 20060810
[ 2.679152] brd: module loaded
[ 2.689390] loop: module loaded
[ 2.693583] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[ 2.703532] nand_get_flash_type: 2c,da against 2c,da
[ 2.709065] ONFI param page 0 valid
[ 2.712740] ONFI flash detected
[ 2.716060] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
[ 2.727974] omap2-nand: detected x8 NAND flash
[ 2.732638] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[ 2.738221] omap2-nand: using custom ecc layout
[ 2.743064] 10 ofpart partitions found on MTD device omap2-nand.0
[ 2.749458] Creating 10 MTD partitions on "omap2-nand.0":
[ 2.755138] 0x000000000000-0x000000020000 : "spl"
[ 2.761933] 0x000000020000-0x000000040000 : "spl_backup1"
[ 2.769383] 0x000000040000-0x000000060000 : "spl_backup2"
[ 2.776826] 0x000000060000-0x000000080000 : "spl_backup3"
[ 2.784226] 0x000000080000-0x000000240000 : "u-boot"
[ 2.792474] 0x000000240000-0x000000260000 : "bootenv"
[ 2.799372] 0x000000260000-0x000000280000 : "fdt"
[ 2.806030] 0x000000280000-0x000000780000 : "kernel"
[ 2.817019] 0x000000800000-0x000001c00000 : "root"
[ 2.840500] 0x000001c00000-0x000003000000 : "config"
[ 2.864325] OneNAND driver initializing
[ 2.870063] usbcore: registered new interface driver asix
[ 2.875877] usbcore: registered new interface driver cdc_ether
[ 2.882119] usbcore: registered new interface driver smsc95xx
[ 2.888238] usbcore: registered new interface driver net1080
[ 2.894264] usbcore: registered new interface driver cdc_subset
[ 2.900559] usbcore: registered new interface driver zaurus
[ 2.906565] usbcore: registered new interface driver cdc_ncm
[ 2.913341] usbcore: registered new interface driver cdc_acm
[ 2.919296] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.927675] Initializing USB Mass Storage driver...
[ 2.932916] usbcore: registered new interface driver usb-storage
[ 2.939217] USB Mass Storage support registered.
[ 2.944259] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 2.950968] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[ 2.956209] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 2.964979] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 2.965001] musb-hdrc: MHDRC RTL version 2.0
[ 2.965016] musb-hdrc: setup fifo_mode 4
[ 2.965044] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 2.965192] musb-hdrc musb-hdrc.0.auto: *** mode=3
[ 2.970238] musb-hdrc musb-hdrc.0.auto: *** power=250
[ 2.976240] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[ 2.981490] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 2.990260] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 2.990280] musb-hdrc: MHDRC RTL version 2.0
[ 2.990294] musb-hdrc: setup fifo_mode 4
[ 2.990316] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 2.990467] musb-hdrc musb-hdrc.1.auto: *** mode=1
[ 2.995512] musb-hdrc musb-hdrc.1.auto: *** power=250
[ 3.000842] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 3.007448] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 3.015702] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[ 3.015808] usb usb1: default language 0x0409
[ 3.015866] usb usb1: udev 1, busnum 1, minor = 0
[ 3.015890] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.023020] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.030591] usb usb1: Product: MUSB HDRC host driver
[ 3.035806] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[ 3.041473] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 3.047447] usb usb1: usb_probe_device
[ 3.047475] usb usb1: configuration #1 chosen from 1 choice
[ 3.047540] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 3.047794] hub 1-0:1.0: usb_probe_interface
[ 3.047818] hub 1-0:1.0: usb_probe_interface - got id
[ 3.047846] hub 1-0:1.0: USB hub found
[ 3.051838] hub 1-0:1.0: 1 port detected
[ 3.055975] hub 1-0:1.0: standalone hub
[ 3.055995] hub 1-0:1.0: individual port power switching
[ 3.056013] hub 1-0:1.0: no over-current protection
[ 3.056031] hub 1-0:1.0: Single TT
[ 3.056052] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 3.056072] hub 1-0:1.0: power on to power good time: 10ms
[ 3.056126] hub 1-0:1.0: local power source is good
[ 3.056240] hub 1-0:1.0: enabling power on all ports
[ 3.057299] mousedev: PS/2 mouse device common for all mice
[ 3.065282] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 3.073079] i2c /dev entries driver
[ 3.078110] pps_ldisc: PPS line discipline registered
[ 3.083592] Driver for 1-wire Dallas network protocol.
[ 3.090922] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 3.098516] cpuidle: using governor ladder
[ 3.102839] cpuidle: using governor menu
[ 3.107394] of_get_named_gpio_flags exited with status 6
[ 3.107415] of_get_named_gpio_flags: can't parse gpios property
[ 3.107431] of_get_named_gpio_flags: can't parse gpios property
[ 3.107470] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[ 3.114705] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[ 3.121521] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[ 3.128745] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[ 3.136065] mmc.4 supply vmmc_aux not found, using dummy regulator
[ 3.143022] omap_hsmmc mmc.4: pins are not configured from the driver
[ 3.157078] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 3.177088] of_get_named_gpio_flags exited with status -517
[ 3.177155] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.184930] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.191707] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[ 3.198899] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 3.207000] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 3.213348] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[ 3.220535] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[ 3.232795] usbcore: registered new interface driver usbhid
[ 3.238711] usbhid: USB HID core driver
[ 3.245624] TCP: cubic registered
[ 3.249148] Initializing XFRM netlink socket
[ 3.253719] NET: Registered protocol family 17
[ 3.258597] NET: Registered protocol family 15
[ 3.263553] Key type dns_resolver registered
[ 3.268183] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 3.276265] ThumbEE CPU extension supported.
[ 3.280776] Registering SWP/SWPB emulation handler
[ 3.286784] registered taskstats version 1
[ 3.293406] of_get_named_gpio_flags exited with status -517
[ 3.293480] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.350390] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 3.356802] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 3.371354] libphy: 4a101000.mdio: probed
[ 3.375676] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 3.385917] Detected MACID = 50:33:8b:32:b7:da
[ 3.390599] cpsw 4a100000.ethernet: NAPI disabled
[ 3.395986] of_get_named_gpio_flags exited with status -517
[ 3.396051] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.404777] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 3.414064] cpu0 supply cpu0 not found, using dummy regulator
[ 3.420558] cpufreq_cpu0: failed to scale voltage up: -22
[ 3.426374] cpufreq_cpu0: failed to scale voltage up: -22
[ 3.439142] ALSA device list:
[ 3.442374] No soundcards found.
[ 3.446919] Freeing init memory: 264K
[ 3.450970] Failed to execute /init
[ 4.430875] jffs2: notice: (122) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 5.735743] net eth0: initializing cpsw version 1.12 (0)
[ 5.744674] net eth0: phy found : id is : 0x7c0f1
[ 5.750117] libphy: PHY 4a101000.mdio:01 not found
[ 5.755312] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 8.821586] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Nov 17 12:45:46 (none) local0.err cgminer: Miner compile time: Thu Nov 2 22:18:40 CST 2017 type: Antminer D3
Nov 17 12:45:46 (none) local0.warn cgminer: Started cgminer 4.9.0
Nov 17 12:45:46 (none) local0.warn cgminer[393]: bitmain_DASH_init
Nov 17 12:45:47 (none) local0.err cgminer[393]: FAN1 too slow ...
Nov 17 12:45:47 (none) local0.err cgminer[393]: FAN2 too slow ...
Nov 17 12:45:47 (none) local0.err cgminer[393]: FAN1 too slow ...
Nov 17 12:45:47 (none) local0.err cgminer[393]: FAN2 too slow ...
Nov 17 12:45:48 (none) local0.err cgminer[393]: FAN1 too slow ...
Nov 17 12:45:48 (none) local0.err cgminer[393]: FAN2 too slow ...
Nov 17 12:45:48 (none) local0.err cgminer[393]: FAN1 too slow ...
Nov 17 12:45:48 (none) local0.err cgminer[393]: FAN2 too slow ...
Nov 17 12:45:49 (none) local0.err cgminer[393]: FAN1 too slow ...
Nov 17 12:45:49 (none) local0.err cgminer[393]: FAN2 too slow ...
Nov 17 12:45:49 (none) local0.err cgminer[393]: FAN1 too slow ...
Nov 17 12:45:50 (none) local0.err cgminer[393]: FAN1 too slow ...
Nov 17 12:45:50 (none) local0.err cgminer[393]: FAN1 too slow ...
Nov 17 12:45:51 (none) local0.warn cgminer[393]: check_fan_speed OK
Nov 17 12:45:51 (none) local0.notice cgminer[393]: detected at /sys/class/gpio/gpio51/value chain 0
Nov 17 12:45:51 (none) local0.notice cgminer[393]: detected at /sys/class/gpio/gpio48/value chain 1
Nov 17 12:45:51 (none) local0.notice cgminer[393]: detected at /sys/class/gpio/gpio47/value chain 2
Nov 17 12:45:51 (none) local0.notice cgminer[393]: detect total chain num 3
Nov 17 12:45:51 (none) local0.notice cgminer[393]: i2c init ok
Nov 17 12:45:51 (none) local0.notice cgminer[393]: check_whether_need_update_pic_program
Nov 17 12:45:52 (none) local0.notice cgminer[393]: reset_PIC16F1704_pic_new ok
Nov 17 12:45:52 (none) local0.notice cgminer[393]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 17 12:45:53 (none) local0.notice cgminer[393]: get_PIC16F1704_software_version_new ok, version = 0x81
Nov 17 12:45:54 (none) local0.notice cgminer[393]: reset_PIC16F1704_pic_new ok
Nov 17 12:45:54 (none) local0.notice cgminer[393]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 17 12:45:55 (none) local0.notice cgminer[393]: get_PIC16F1704_software_version_new ok, version = 0x81
Nov 17 12:45:56 (none) local0.notice cgminer[393]: reset_PIC16F1704_pic_new ok
Nov 17 12:45:57 (none) local0.notice cgminer[393]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 17 12:45:57 (none) local0.notice cgminer[393]: get_PIC16F1704_software_version_new ok, version = 0x81
Nov 17 12:45:57 (none) local0.notice cgminer[393]: every_chain_reset_PIC16F1704_pic_new
Nov 17 12:45:58 (none) local0.notice cgminer[393]: reset_PIC16F1704_pic_new ok
Nov 17 12:45:59 (none) local0.notice cgminer[393]: reset_PIC16F1704_pic_new ok
Nov 17 12:46:01 (none) local0.notice cgminer[393]: reset_PIC16F1704_pic_new ok
Nov 17 12:46:01 (none) local0.notice cgminer[393]: every_chain_jump_from_loader_to_app_PIC16F1704_new
Nov 17 12:46:02 (none) local0.notice cgminer[393]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 17 12:46:02 (none) local0.notice cgminer[393]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 17 12:46:03 (none) local0.notice cgminer[393]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 17 12:46:03 (none) local0.notice cgminer[393]: every_chain_enable_PIC16F1704_dc_dc_new
Nov 17 12:46:03 (none) local0.notice cgminer[393]: pic_heart_beat_func_new
Nov 17 12:46:03 (none) local0.notice cgminer[393]: enable_PIC16F1704_dc_dc_new ok
Nov 17 12:46:04 (none) local0.notice cgminer[393]: enable_PIC16F1704_dc_dc_new ok
Nov 17 12:46:04 (none) local0.notice cgminer[393]: enable_PIC16F1704_dc_dc_new ok
Nov 17 12:46:04 (none) local0.notice cgminer[393]: reset_all_hash_board
Nov 17 12:46:05 (none) local0.notice cgminer[393]: tty_init
Nov 17 12:46:05 (none) local0.notice cgminer[393]: tty_init_chain
Nov 17 12:46:05 (none) local0.notice cgminer[393]: tty_init_chain chainid = 0
Nov 17 12:46:05 (none) local0.err cgminer[393]: create rx read thread for chain 0 ok
Nov 17 12:46:05 (none) local0.notice cgminer[393]: Start A New Asic Response.Chain Id:[0]
Nov 17 12:46:05 (none) local0.err cgminer[393]: create tx read thread for chain 0 ok
Nov 17 12:46:05 (none) local0.notice cgminer[393]: open device over
Nov 17 12:46:05 (none) local0.notice cgminer[393]: tty_init_chain
Nov 17 12:46:05 (none) local0.notice cgminer[393]: tty_init_chain chainid = 1
Nov 17 12:46:05 (none) local0.err cgminer[393]: create rx read thread for chain 1 ok
Nov 17 12:46:05 (none) local0.notice cgminer[393]: Start A New Asic Response.Chain Id:[1]
Nov 17 12:46:06 (none) local0.err cgminer[393]: create tx read thread for chain 1 ok
Nov 17 12:46:06 (none) local0.notice cgminer[393]: open device over
Nov 17 12:46:06 (none) local0.notice cgminer[393]: tty_init_chain
Nov 17 12:46:06 (none) local0.notice cgminer[393]: tty_init_chain chainid = 2
Nov 17 12:46:06 (none) local0.err cgminer[393]: create rx read thread for chain 2 ok
Nov 17 12:46:06 (none) local0.notice cgminer[393]: Start A New Asic Response.Chain Id:[2]
Nov 17 12:46:06 (none) local0.err cgminer[393]: create tx read thread for chain 2 ok
Nov 17 12:46:06 (none) local0.notice cgminer[393]: open device over
Nov 17 12:46:06 (none) local0.notice cgminer[393]: tty_init_chain
Nov 17 12:46:06 (none) local0.notice cgminer[393]: open device over
Seems correct. Make sure you flashed the right file. The webpage I talk about is "Miner Configuration" -> "Advanced settings"