I am currently trying to overclock my cards, doing this from work on teamviewer lol. I am confused as to why it only lets me drop my GPU frequency to -4% on wattman? Doesn't make any sense to me as the post I am following says to drop it to -30%. Also I dropped my Power Limit to -30% but only saw a 20w reduction... not sure if its because I set my fan at minimum 3000 RPM or whats going on. I have my memory up to 950 right now.
Also, I am only able to set about 20gb of virtual memory because I only have a 60 gb ssd. If I plug in a second oldschool HDD into sata slot 2 and set the virtual memory on that drive to say 60 GB would that work or does it all have to be on the same drive?
I had the same problem when i tried a "normal" driver release, i could only underclock -4% , installed the official amd compute workload driver 23aug and there was the -30% underclock!
I find it alot better and stable to undervolt and set clocks with softpowerplay, OverdriveNTool 0.2.1 has a built in editor.
Have 2 vega rigs working with this settings for some days now, it looks quite stable except 1 card needs 910-920mV or it crashes sooner or later.
https://imgur.com/a/KxdIw