Looking at the photo and assuming the board is exactly 10cm X 10cm
and assuming that the chips are mounted the same distance apart left to right as front to back,
a heat sink that is 2.5cm by 2.5cm with a hole drilled in the middle should cover all four chips.
Worst case you get a heat sink that is 2.5cm x X long and cut your own to length.
and assuming that the chips are mounted the same distance apart left to right as front to back,
a heat sink that is 2.5cm by 2.5cm with a hole drilled in the middle should cover all four chips.
Worst case you get a heat sink that is 2.5cm x X long and cut your own to length.
I wonder if the same measurement would apply to the 18ghs board? I guess we will see it eventually
My measurements are an ESTIMATE only. Please don't go buying heatsinks based on my estimate
Maybe someone from terrahash could give us an accurate measurement?