I have got another problem after tested your firmware from page 1.

After rollback to the official firmware, my temp is really abnormal. It is much higher than usually.

I have 2 D3 in the same location and they normal run around the same 70 / sub 70, but the temp has suddenly shoot right up even after rolling back to the official firmware which is quite worrying.

D3 which tested with your firmware and rolled back to stock is running at 487(default) Board temp 59/59/61 and Chip temp 76/76/78 fan at 4560rpm

D3 right next to it with stock and not tested with your firmware is running at 487 (default) board temp 51/52/56 and Chip temp 66/67/71 fan at 4140 rpm.

My D3 have never had board temp over 57 and they are normally at around 56 max but after flashing your firmware I can't seems to get the temps down.

Please advise!