Would it be okay to get some Frequency/ASIC voltage data going? Would be really helpful for people just perusing to see what they can push with the right settings.
I'm not sure if this is average, but here is what I have going so far:
Hash: Frequency/ASIC : Watts
15.6 MH/s: 437M/lowest : 780-790W
Please add to the list. Thank you!
Batch: Hash: Frequency/ASIC : Watts
Batch 1 14.77 MH/s 400M/lowest: 699-704 W
I also have batch 1 but I can't get 700w with 400M
Similar hash (14.6) can get on 387M but 710watts.
I think this is due to my wall voltage which is high at 248 volt probably with some voltage optimiser and ~220v can go below 700w.
Miner in cold garage and webcam on the watt meter;)
http://tinyimg.io/i/nz3JhWs.jpgNice camera setup...
I was about to recommend this product, which is a 240v rated (I'm using it at 240) smart plug that can also track usage, but it appears the usage function has died on me (or their app is mis-behaving). hah. (Note, I do not recommend exposing your miner's power source to the internet for extended periods of time, this was just convenient for testing).
