Post
Topic
Board Mining (Altcoins)
Re: Antminer D3 Blissz firmware (26/11 must update!!!)
by
BartoszN1990
on 27/11/2017, 18:27:42 UTC
i use oryginal bitmain fw now.

when i set 400 M system dont se chain 1
when i set 350 m system se chain 54 chips but not mining
Quote
AntMiner
Chain#   ASIC#   Frequency   GH/S(RT)   HW   Temp(PCB)   Temp(Chip)   ASIC status
1   54   350   0.00   0   0   0   xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxx
2   60   350   4434.28   0   23   33   oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo
3   60   350   4281.28   0   22   31   oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooooooo oooo


Full kernel log:

Quote
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65280
[    0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 64768 pages, LIFO batch:15
[    0.000000] AM335X ES1.0 (neon )
[    0.000000] PERCPU: Embedded 8 pages/cpu @c0933000 s9408 r8192 d15168 u32768
[    0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[    0.000000] pcpu-alloc:
  • 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64768
[    0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] allocated 524288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 255MB = 255MB total
[    0.000000] Memory: 238676k/238676k available, 23468k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf800000 - 0xbfe00000   (   6 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0612cf0   (6188 kB)
[    0.000000]       .init : 0xc0613000 - 0xc06554c0   ( 266 kB)
[    0.000000]       .data : 0xc0656000 - 0xc06cc020   ( 473 kB)
[    0.000000]        .bss : 0xc06cc020 - 0xc0725e3c   ( 360 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000]    RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000357] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[    0.015439] pid_max: default: 32768 minimum: 301
[    0.015668] Security Framework initialized
[    0.015763] Mount-cache hash table entries: 512
[    0.024600] Initializing cgroup subsys cpuacct
[    0.024632] Initializing cgroup subsys memory
[    0.024695] Initializing cgroup subsys blkio
[    0.024834] CPU: Testing write buffer coherency: ok
[    0.025405] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.025482] Setting up static identity map for 0x8038c820 - 0x8038c86c
[    0.026812] Brought up 1 CPUs
[    0.026837] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[    0.028137] devtmpfs: initialized
[    0.092532] pinctrl core: initialized pinctrl subsystem
[    0.092748] rstctl core: initialized rstctl subsystem
[    0.093241] regulator-dummy: no parameters
[    0.093805] NET: Registered protocol family 16
[    0.094509] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.104177] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[    0.104360] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.105460] platform 49000000.edma: alias fck already exists
[    0.105493] platform 49000000.edma: alias fck already exists
[    0.105521] platform 49000000.edma: alias fck already exists
[    0.106671] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.106852] OMAP GPIO hardware version 0.1
[    0.108268] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.109577] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.110889] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.111520] of_get_named_gpio_flags exited with status 52
[    0.111553] gpio-rctrl rstctl.3: loaded OK
[    0.116660] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    0.119865] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.122033] cpsw.0: No hwaddr in dt. Using 90:70:65:30:e0:f3 from efuse
[    0.122065] cpsw.1: No hwaddr in dt. Using 90:70:65:30:e0:f5 from efuse
[    0.137624] bio: create slab at 0
[    0.149762] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.150004] of_get_named_gpio_flags: can't parse gpios property
[    0.150293] vmmcsd_fixed: 3300 mV
[    0.153404] SCSI subsystem initialized
[    0.153860] usbcore: registered new interface driver usbfs
[    0.153973] usbcore: registered new interface driver hub
[    0.154308] usbcore: registered new device driver usb
[    0.156410] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[    0.156444] omap_i2c 4819c000.i2c: unable to select pin group
[    0.156640] media: Linux media interface: v0.10
[    0.156736] Linux video capture interface: v2.00
[    0.156852] pps_core: LinuxPPS API ver. 1 registered
[    0.156868] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.157585] Advanced Linux Sound Architecture Driver Initialized.
[    0.158780] Switching to clocksource gp_timer
[    0.176774] NET: Registered protocol family 2
[    0.177769] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.177857] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[    0.177946] TCP: Hash tables configured (established 2048 bind 2048)
[    0.178039] TCP: reno registered
[    0.178066] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.178111] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.178605] NET: Registered protocol family 1
[    0.179198] RPC: Registered named UNIX socket transport module.
[    0.179220] RPC: Registered udp transport module.
[    0.179234] RPC: Registered tcp transport module.
[    0.179248] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.179635] Trying to unpack rootfs image as initramfs...
[    1.942040] Freeing initrd memory: 12240K
[    1.942759] CPU PMU: probing PMU on CPU 0
[    1.942794] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    1.943340] omap2_mbox_probe: platform not supported
[    1.947239] VFS: Disk quotas dquot_6.5.2
[    1.947479] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.948886] NFS: Registering the id_resolver key type
[    1.948981] Key type id_resolver registered
[    1.948998] Key type id_legacy registered
[    1.949066] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.949496] msgmni has been set to 490
[    1.952369] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.952396] io scheduler noop registered
[    1.952412] io scheduler deadline registered
[    1.952468] io scheduler cfq registered (default)
[    1.956542] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.958970] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[    1.959260] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[    2.620083] console [ttyO0] enabled
[    2.624620] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[    2.633273] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[    2.641950] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[    2.650553] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[    2.659582] [drm] Initialized drm 1.1.0 20060810
[    2.678245] brd: module loaded
[    2.688533] loop: module loaded
[    2.692755] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[    2.702702] nand_get_flash_type: 2c,da against 2c,da
[    2.708230] ONFI param page 0 valid
[    2.711903] ONFI flash detected
[    2.715223] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron MT29F2G08ABAEAWP), 256MiB, page size: 2048, OOB size: 64
[    2.727135] omap2-nand: detected x8 NAND flash
[    2.731801] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    2.737382] omap2-nand: using custom ecc layout
[    2.742226] 10 ofpart partitions found on MTD device omap2-nand.0
[    2.748620] Creating 10 MTD partitions on "omap2-nand.0":
[    2.754297] 0x000000000000-0x000000020000 : "spl"
[    2.761119] 0x000000020000-0x000000040000 : "spl_backup1"
[    2.768587] 0x000000040000-0x000000060000 : "spl_backup2"
[    2.775952] 0x000000060000-0x000000080000 : "spl_backup3"
[    2.783361] 0x000000080000-0x000000240000 : "u-boot"
[    2.791562] 0x000000240000-0x000000260000 : "bootenv"
[    2.798520] 0x000000260000-0x000000280000 : "fdt"
[    2.805110] 0x000000280000-0x000000780000 : "kernel"
[    2.816135] 0x000000800000-0x000001c00000 : "root"
[    2.839637] 0x000001c00000-0x000003000000 : "config"
[    2.863426] OneNAND driver initializing
[    2.869164] usbcore: registered new interface driver asix
[    2.874982] usbcore: registered new interface driver cdc_ether
[    2.881230] usbcore: registered new interface driver smsc95xx
[    2.887348] usbcore: registered new interface driver net1080
[    2.893372] usbcore: registered new interface driver cdc_subset
[    2.899665] usbcore: registered new interface driver zaurus
[    2.905673] usbcore: registered new interface driver cdc_ncm
[    2.912414] usbcore: registered new interface driver cdc_acm
[    2.918370] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.926750] Initializing USB Mass Storage driver...
[    2.931990] usbcore: registered new interface driver usb-storage
[    2.938290] USB Mass Storage support registered.
[    2.943331] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    2.950084] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[    2.955321] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.964093] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.964115] musb-hdrc: MHDRC RTL version 2.0
[    2.964130] musb-hdrc: setup fifo_mode 4
[    2.964158] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.964304] musb-hdrc musb-hdrc.0.auto: *** mode=3
[    2.969347] musb-hdrc musb-hdrc.0.auto: *** power=250
[    2.975407] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[    2.980647] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.989416] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.989436] musb-hdrc: MHDRC RTL version 2.0
[    2.989450] musb-hdrc: setup fifo_mode 4
[    2.989472] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.989615] musb-hdrc musb-hdrc.1.auto: *** mode=1
[    2.994657] musb-hdrc musb-hdrc.1.auto: *** power=250
[    2.999965] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    3.006645] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[    3.014884] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[    3.014990] usb usb1: default language 0x0409
[    3.015049] usb usb1: udev 1, busnum 1, minor = 0
[    3.015072] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.022199] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.029771] usb usb1: Product: MUSB HDRC host driver
[    3.034986] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[    3.040653] usb usb1: SerialNumber: musb-hdrc.1.auto
[    3.046631] usb usb1: usb_probe_device
[    3.046659] usb usb1: configuration #1 chosen from 1 choice
[    3.046726] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    3.046928] hub 1-0:1.0: usb_probe_interface
[    3.046950] hub 1-0:1.0: usb_probe_interface - got id
[    3.046978] hub 1-0:1.0: USB hub found
[    3.050981] hub 1-0:1.0: 1 port detected
[    3.055119] hub 1-0:1.0: standalone hub
[    3.055138] hub 1-0:1.0: individual port power switching
[    3.055156] hub 1-0:1.0: no over-current protection
[    3.055173] hub 1-0:1.0: Single TT
[    3.055194] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    3.055213] hub 1-0:1.0: power on to power good time: 10ms
[    3.055269] hub 1-0:1.0: local power source is good
[    3.055418] hub 1-0:1.0: enabling power on all ports
[    3.056478] mousedev: PS/2 mouse device common for all mice
[    3.064411] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    3.071911] 44e3e000.rtc: already running
[    3.076407] i2c /dev entries driver
[    3.081452] pps_ldisc: PPS line discipline registered
[    3.086926] Driver for 1-wire Dallas network protocol.
[    3.094207] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    3.101772] cpuidle: using governor ladder
[    3.106100] cpuidle: using governor menu
[    3.110675] of_get_named_gpio_flags exited with status 6
[    3.110694] of_get_named_gpio_flags: can't parse gpios property
[    3.110710] of_get_named_gpio_flags: can't parse gpios property
[    3.110746] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[    3.117971] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[    3.124785] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[    3.132004] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[    3.139367] mmc.4 supply vmmc_aux not found, using dummy regulator
[    3.146310] omap_hsmmc mmc.4: pins are not configured from the driver
[    3.157051] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[    3.180964] of_get_named_gpio_flags exited with status -517
[    3.181032] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.188810] ledtrig-cpu: registered to indicate activity on CPUs
[    3.195587] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[    3.202778] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    3.210947] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    3.217243] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[    3.224423] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[    3.236672] usbcore: registered new interface driver usbhid
[    3.242591] usbhid: USB HID core driver
[    3.249496] TCP: cubic registered
[    3.253020] Initializing XFRM netlink socket
[    3.257589] NET: Registered protocol family 17
[    3.262484] NET: Registered protocol family 15
[    3.267332] Key type dns_resolver registered
[    3.271970] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    3.280054] ThumbEE CPU extension supported.
[    3.284564] Registering SWP/SWPB emulation handler
[    3.290575] registered taskstats version 1
[    3.297196] of_get_named_gpio_flags exited with status -517
[    3.297270] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.354249] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    3.360696] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    3.375230] libphy: 4a101000.mdio: probed
[    3.379549] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    3.389790] Detected MACID = 90:70:65:30:e0:f3
[    3.394475] cpsw 4a100000.ethernet: NAPI disabled
[    3.399867] of_get_named_gpio_flags exited with status -517
[    3.399932] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.408656] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    3.417939] cpu0 supply cpu0 not found, using dummy regulator
[    3.424432] cpufreq_cpu0: failed to scale voltage up: -22
[    3.430247] cpufreq_cpu0: failed to scale voltage up: -22
[    3.443006] ALSA device list:
[    3.446240]   No soundcards found.
[    3.450793] Freeing init memory: 264K
[    3.454845] Failed to execute /init
[    4.524669] jffs2: notice: (122) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    5.905128] net eth0: initializing cpsw version 1.12 (0)
[    5.914056] net eth0: phy found : id is : 0x7c0f1
[    5.919500] libphy: PHY 4a101000.mdio:01 not found
[    5.924697] net eth0: phy 4a101000.mdio:01 not found on slave 1
[    8.989470] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Nov 27 18:21:02 (none) local0.err cgminer: Miner compile time: Mon Nov 20 17:06:56 CST 2017 type: Antminer D3
Nov 27 18:21:02 (none) local0.warn cgminer: Started cgminer 4.9.0
Nov 27 18:21:02 (none) local0.warn cgminer[375]: bitmain_DASH_init
Nov 27 18:21:02 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 18:21:02 (none) local0.err cgminer[375]: FAN2 too slow ...
Nov 27 18:21:03 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 18:21:03 (none) local0.err cgminer[375]: FAN2 too slow ...
Nov 27 18:21:03 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 18:21:03 (none) local0.err cgminer[375]: FAN2 too slow ...
Nov 27 18:21:04 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 18:21:04 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 18:21:05 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 18:21:05 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 18:21:06 (none) local0.err cgminer[375]: FAN1 too slow ...
Nov 27 18:21:06 (none) local0.warn cgminer[375]: check_fan_speed OK
Nov 27 18:21:06 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio51/value  chain 0
Nov 27 18:21:06 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio48/value  chain 1
Nov 27 18:21:06 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio47/value  chain 2
Nov 27 18:21:06 (none) local0.notice cgminer[375]: detect total chain num 3
Nov 27 18:21:06 (none) local0.notice cgminer[375]: i2c init ok
Nov 27 18:21:06 (none) local0.notice cgminer[375]: check_whether_need_update_pic_program
Nov 27 18:21:07 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 18:21:08 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 18:21:08 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Nov 27 18:21:09 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 18:21:10 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 18:21:10 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Nov 27 18:21:11 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 18:21:12 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 18:21:12 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Nov 27 18:21:12 (none) local0.notice cgminer[375]: every_chain_reset_PIC16F1704_pic_new
Nov 27 18:21:14 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 18:21:15 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 18:21:16 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Nov 27 18:21:17 (none) local0.notice cgminer[375]: every_chain_jump_from_loader_to_app_PIC16F1704_new
Nov 27 18:21:17 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 18:21:17 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 18:21:18 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Nov 27 18:21:19 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Nov 27 18:21:19 (none) local0.notice cgminer[375]: pic_heart_beat_func_new
Nov 27 18:21:19 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:19 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:19 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:20 (none) local0.notice cgminer[375]: reset_all_hash_board
Nov 27 18:21:21 (none) local0.notice cgminer[375]: tty_init
Nov 27 18:21:21 (none) local0.notice cgminer[375]: tty_init_chain
Nov 27 18:21:21 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Nov 27 18:21:21 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Nov 27 18:21:21 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Nov 27 18:21:21 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Nov 27 18:21:21 (none) local0.notice cgminer[375]: open device over
Nov 27 18:21:21 (none) local0.notice cgminer[375]: tty_init_chain
Nov 27 18:21:21 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Nov 27 18:21:21 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Nov 27 18:21:21 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Nov 27 18:21:21 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Nov 27 18:21:21 (none) local0.notice cgminer[375]: open device over
Nov 27 18:21:21 (none) local0.notice cgminer[375]: tty_init_chain
Nov 27 18:21:21 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Nov 27 18:21:21 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Nov 27 18:21:21 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Nov 27 18:21:21 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Nov 27 18:21:21 (none) local0.notice cgminer[375]: open device over
Nov 27 18:21:21 (none) local0.notice cgminer[375]: tty_init_chain
Nov 27 18:21:21 (none) local0.notice cgminer[375]: open device over
Nov 27 18:21:22 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Nov 27 18:21:22 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 0 ASICs
Nov 27 18:21:22 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Nov 27 18:21:22 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 18:21:23 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new
Nov 27 18:21:25 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Nov 27 18:21:25 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:25 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:25 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:26 (none) local0.notice cgminer[375]: reset_all_hash_board
Nov 27 18:21:27 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Nov 27 18:21:27 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 30 ASICs
Nov 27 18:21:27 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Nov 27 18:21:28 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 18:21:28 (none) local0.notice cgminer[375]: recheck_asic_num DONE!
Nov 27 18:21:28 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new
Nov 27 18:21:30 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Nov 27 18:21:30 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:30 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:30 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:31 (none) local0.notice cgminer[375]: reset_all_hash_board
Nov 27 18:21:32 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Nov 27 18:21:32 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 54 ASICs
Nov 27 18:21:32 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Nov 27 18:21:33 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 18:21:33 (none) local0.notice cgminer[375]: recheck_asic_num DONE!
Nov 27 18:21:33 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new
Nov 27 18:21:35 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Nov 27 18:21:35 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:35 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:35 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:21:36 (none) local0.notice cgminer[375]: reset_all_hash_board
Nov 27 18:21:37 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Nov 27 18:21:37 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 54 ASICs
Nov 27 18:21:37 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Nov 27 18:21:38 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 60 ASICs
Nov 27 18:21:38 (none) local0.notice cgminer[375]: recheck_asic_num DONE!
Nov 27 18:21:38 (none) local0.notice cgminer[375]: calculate_address_interval: temp_asic_number = 64, addrInterval = 1
Nov 27 18:21:38 (none) local0.notice cgminer[375]: calculate_address_interval: CHIP_OFFSET = 0x04000000, CORE_OFFSET = 0x00800000
Nov 27 18:21:38 (none) local0.notice cgminer[375]: set_ticket_mask ticket_mask = 0x0000001b
Nov 27 18:21:38 (none) local0.notice cgminer[375]: set_frequency: frequency = 350
Nov 27 18:21:38 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 54 ASIC, and addrInterval is 1
Nov 27 18:21:38 (none) local0.notice cgminer[375]: Now Set
  • Chain Address
Nov 27 18:21:39 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 1
Nov 27 18:21:39 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Nov 27 18:21:40 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 1
Nov 27 18:21:40 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Nov 27 18:21:40 (none) local0.notice cgminer[375]: software_set_address_chain: chain 3 has 0 ASIC, and addrInterval is 1
Nov 27 18:21:40 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Nov 27 18:21:40 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Nov 27 18:21:40 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Nov 27 18:21:40 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Nov 27 18:21:40 (none) local0.notice cgminer[375]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 18:21:40 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 18:21:40 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 18:21:40 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 18:21:40 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 18:21:40 (none) local0.notice cgminer[375]: 0 calibration_sensor_offset_chain
Nov 27 18:21:41 (none) local0.notice cgminer[375]: chain:0 local:0 remote:0
Nov 27 18:21:41 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Nov 27 18:21:42 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Nov 27 18:21:42 (none) local0.notice cgminer[375]: 1 calibration_sensor_offset_chain
Nov 27 18:21:42 (none) local0.notice cgminer[375]: chain:1 local:10 remote:12
Nov 27 18:21:42 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Nov 27 18:21:42 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -2,
Nov 27 18:21:42 (none) local0.notice cgminer[375]: 2 calibration_sensor_offset_chain
Nov 27 18:21:43 (none) local0.notice cgminer[375]: chain:2 local:10 remote:16
Nov 27 18:21:43 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Nov 27 18:21:43 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -6,
Nov 27 18:21:43 (none) local0.notice cgminer[375]: chain:2 local:10 remote:9
Nov 27 18:21:43 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Nov 27 18:21:44 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -5,
Nov 27 18:21:44 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Nov 27 18:21:44 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Nov 27 18:21:44 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Nov 27 18:21:44 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Nov 27 18:21:44 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Nov 27 18:21:45 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -2,
Nov 27 18:21:45 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Nov 27 18:21:45 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Nov 27 18:21:45 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -5,
Nov 27 18:21:45 (none) local0.notice cgminer[375]: frequency = '350'
Nov 27 18:21:45 (none) local0.notice cgminer[375]: dev.timeout = 862812 us
Nov 27 18:21:45 (none) local0.notice cgminer[375]: open_core_chain
Nov 27 18:21:45 (none) local0.notice cgminer[375]: open_core_chain
Nov 27 18:21:45 (none) local0.notice cgminer[375]: open_core_chain
Nov 27 18:21:45 (none) local0.notice cgminer[375]: open_core_chain
Nov 27 18:21:48 (none) local0.err cgminer[375]: cgminer time error total_secs = 1511806908.925045 last_total_secs = 1.000000
Nov 27 18:21:50 (none) local0.warn cgminer[375]: Pool 0 stratum+tcp://stratum-dash.antpool.com:6099 alive, testing stability
Nov 27 18:21:50 (none) local0.warn cgminer[375]: Switching to pool 0 stratum+tcp://stratum-dash.antpool.com:6099
Nov 27 18:21:50 (none) local0.err cgminer[375]: D1 0: work 7f not find error
Nov 27 18:21:55 (none) local0.warn cgminer[375]: API running in IP access mode on port 4028 (15)
Nov 27 18:23:49 (none) local0.notice cgminer[375]: chain 0 reinit 0.00
Nov 27 18:23:50 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:23:52 (none) local0.notice cgminer[375]: tty_init_chain
Nov 27 18:23:52 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Nov 27 18:23:52 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Nov 27 18:23:52 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Nov 27 18:23:52 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Nov 27 18:23:52 (none) local0.notice cgminer[375]: open device over
Nov 27 18:23:52 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 54 ASIC, and addrInterval is 1
Nov 27 18:23:52 (none) local0.notice cgminer[375]: Now Set
  • Chain Address
Nov 27 18:23:53 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Nov 27 18:23:53 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 18:23:53 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Nov 27 18:23:53 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Nov 27 18:23:54 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Nov 27 18:23:54 (none) local0.notice cgminer[375]: open_core_chain
Nov 27 18:25:51 (none) local0.notice cgminer[375]: chain 0 reinit 0.00
Nov 27 18:25:52 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Nov 27 18:25:54 (none) local0.notice cgminer[375]: tty_init_chain
Nov 27 18:25:54 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Nov 27 18:25:54 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Nov 27 18:25:54 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Nov 27 18:25:54 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Nov 27 18:25:54 (none) local0.notice cgminer[375]: open device over
Nov 27 18:25:54 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 54 ASIC, and addrInterval is 1
Nov 27 18:25:54 (none) local0.notice cgminer[375]: Now Set
  • Chain Address
Nov 27 18:25:55 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Nov 27 18:25:55 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Nov 27 18:25:55 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Nov 27 18:25:55 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Nov 27 18:25:56 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 00,
Nov 27 18:25:56 (none) local0.notice cgminer[375]: open_core_chain