Bios mod for 1070 ?
Also PCI 1.0 mean pci 1x it's usual to get that when you use a riser, do you have the other gpu connected to a riser or directly on the mobo ?
So far I have:
- MoBO Asus Z270P, BIOS 8010;
- x2 GeForce 1070, driver 384;
- Gen2 is set everywhere;
- Audio, SATA disabled;
- Primary display: PCIE, M.2: PCIE
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1b81 (rev a1)
I am using
Dynamode PCI-E x1 to 16x, 60 cм USB 3.0 Cable SATA to 6Pin Power ver.006C - each of 2 GPUs are connected directly to the MOBO. I am about to add 2 more 1070, and then 2 more.
So far getting 440-450 Sol/W on each GPU, 60-65C - stock.