Anyway ETH is 12,1 MHS and XMR is 405 h/s.
using straps from 1425 and claymore:
-mclock 2060
-mvddc 1000
-cclock 1080
-cvddc 925
I apologize for the noob question, but I just want to clarify for myself - Have you just copied the timing value from 1425 to 1500? Also, is that possible to put the clock settings right into firmware ? The thing is I don't use claymore... Thank you.
Yes, just copy value. And rise max memory clock to be able to go above 2000.
Well maybe you should start using Claymore, because i am getting 408 hs in claymore and 345 hs in xmr-stk-amd with same settings. Otherwise you can tune clocks in lot of softwares like msi afterburner, atitool etc...it is much easier to control your clocks from OS, because you need to tune card and adjust by small steps to find what you card can handle. You dont want to flash every card for each 10mhz change.
I find memory clock 2040 (not much for micron tbh) as stable with hashrate of 408 hs XMR and 12.1 mhs ETH...
To sumarize this card I think cooling is nice, temps are low and fan is not noicy. They do quite nice hashrate in CryptoNight (they do more then 50% of usual RX580 output for less then 50% price and at very low power consump.),
but below avarage (for micron) in Ethash.