Hello there!

I so did get my EVGA 1080ti card in today and tried to mine with the existing (5) AMD RX 480s and new (1) EVGA 1080ti SC2 card.

I did disable Windows 10 automatic driver updates as a precaution so I could control which drivers were installed.

The driver installed fine and the OS did see the new EVGA 1080ti card.

HOWEVER, only (3) of the (5) existing AMD RX Radeon 480s were detected as GPUs and (2) were NOT detected as GPUs. They showed up in Device Manager with the yellow triangle exclamation marks.

All (5) were detected, however on the (2) that are not functioning from Device Manager it says:

     "Windows has stopped this device because it has reported problems. (Code 43)"

I read elsewhere that I should try to update the driver manually on the ones that didn't show up as GPUs and is still had the same result. Windows said everything was fine with the drivers.

The Motherboard does have a "mining" feature which is indeed set to enabled.

My current hardware configuration is:

     BIOSTAR TB350-BTC AM4 AMD Motherboard (6) PCI-E slots
     16GB RAM
     AMD A6-9500 Bristol Ridge Dual-Core 3.5 GHz Socket AM4 CPU
     240GB SSD Hard Drive
     Enermax Platimax PC 1350 Watt PSU (Power Supply)
     (6) PCI-E risers
     (6) AMD RX Radeon 480 cards
     (1) NVidia EVGA 1080ti SC2 card

Any advice/suggestions welcome!

Thank you in advance!

--
JW