Post
Topic
Board Mining (Altcoins)
Re: RX 570 nitro+ power consumption
by
miningdigitalcurrency
on 06/12/2017, 11:04:00 UTC
I have MSI Armor Oc rx570's with 4gb Elpida Memory.  

I modded my bios with the 1500 Straps, undervolted to 900mv, TDP 75w, max power limit 100w.  Afterburner settings to -57mv, +15% power limit, 1128 core clock, 1750 mem.  They were hashing at 25-26 MH/s each with 88w at the wall each mining ETH.  One runs on the radeon mining drivers, the other doesn't (setup on two different computers).  I think the 570's are a bit tempermental compared to the 470's.  Not sure about the 580's.

You really need to mod the bios to get a better Hash rate to power consumption ratio.  For me I would rather hash at 26 MH/s at 88w compared to 28 MH/s at 150w.  @88w at the wall, the fans only run at like 25% so they are very quiet for in-house mining.  They operate at 56C right now.   Currently I'm mining on cryptonight algo at 735-740 H/s using the same bios setup because I was too lazy to reflash Smiley  1268 core, 1750 mem, 87-88w @ the wall.


i found all item in polaris except the undervolted.. where do you set it?


thanks Smiley