Hi, my rig keeps rebooting every 2 minutes if I use dual mining ETH and SH. When only mining ETH, no rebooting occurs.
Can anyone please help?
Using claymore-eth-v10.2
My config is:
-wd 1 -r 1 -allpools 1 -mport -3333 -asm 1 -dpool stratum+tcp://eu.luxor.tech:3333 -dwal [Siacoin_wallet_address].$rigName -dpsw x -dcoin sc -epool stratum+tcp://eth-eu.dwarfpool.com:8008 -ewal $walletETH/$rigName -esm 0 -epsw x
Thanks!
Check your risers they be burned.
Can also be PSU not being able to handle dual mining. Dual mining uses a lot more power and is very hard on your graphics cards. I stopped dual mining over a year ago so that my graphics cards lasted longer and I really did not see the extra power used to be much benefit in the long run dual mining. Just mine ETH and be nice to your rig.
Set -ethi to 1 and your -powlim to -10 and see if it runs, and then raise the -ethi until unstable. It will prove if you are pulling too much power for the PSU. Not knowing your system configuration makes it tough to know if your psu is undersized. You should also make sure you are not undervolting your core clocks too much with a third party power manager since undervolting the core clocks will cause the system to crash and reboot, where as undervolting the memory clocks will only result in individual cards tripping out.
One other thought, make sure you don't have a bad card