Hello , do any know if there is an easy fix for cubes that makes the titans just restart ? got 2 of those "funny" cubes
also got some strange cubes showing low current on some dies and some cubes with completly dead dies is there a easy fix for this ?
i was stupid enough to buy 12 titans and payed way to much for them :/
Depends. If you have an ohm meter can you check resistance between pins 4, 6, and 8 to ground (pin 10). If pin 6 is low (under 100 ohms) the cube is bad. If pin 8 is low I can fix that, likewise if pin 4 is low.
Remember: Don't run them too hard to burn the plugs and always power down before removing any ribbon cable anywhere. And with litecoin going up in value you never know.....
looks like they are dead only getting about 230 ohm resistance between 4 and 10.