A big thanks Storx.
I started out with DDR3L 1600/1333MHz 1.35 volt as that's what Onda states on its website:
http://www.onda.cn/MotherBoard_Specifications.aspx?id=373
I then went to DDR4 SO-DIMM DDR4 2133 1.2 volts. It's the same one vapourminer used - but only 4 GB instead of 8.
I can barely read the etching on the RAM slot but it looks like:
DDR4 ST12V P (or D) R (or 4) 1710.
Cheers
I started out with DDR3L 1600/1333MHz 1.35 volt as that's what Onda states on its website:
http://www.onda.cn/MotherBoard_Specifications.aspx?id=373
I then went to DDR4 SO-DIMM DDR4 2133 1.2 volts. It's the same one vapourminer used - but only 4 GB instead of 8.
I can barely read the etching on the RAM slot but it looks like:
DDR4 ST12V P (or D) R (or 4) 1710.
Cheers
I actually had this exact question thought I had the ram I needed but I definitely don’t
@phil what ram are you using for the onda
This is for the board you sent me
Anyone have a link to ram that will definitely work?
What connections needs to be powered and what doesn’t? // all these sata and molex?
for the pictured board, the onda B250 D8P ver 1.0, here is the exact ram i bought, runs great.
https://www.newegg.com/Product/Product.aspx?Item=N82E16820232153
Quote
G.SKILL Ripjaws Series 8GB 260-Pin DDR4 SO-DIMM DDR4 2400 (PC4 19200) Laptop Memory Model F4-2400C16S-8GRS
i also plugged in all power connectors: the atx mobo and 8 pin cpu (duh), 3 molex, 3 sata even when i just had just one card in setting it up initially. card was in 1st slot closest to cpu.
other stuff was standard: G4400 cpu, 128 gig msata.