Is there a special trick to get the ONDA B250 BTC-D8P MoBo Ver.1 to work?
( Note: I'm getting the same symptoms Storx described on the 6 slot ONDA. I tried clicking the the button he used to resolve the issue. No luck)
Do I need to install a VGA driver or something else?
Is there an online manual ?( I couldn't find one of the ONDA website.)
( Note: I'm getting the same symptoms Storx described on the 6 slot ONDA. I tried clicking the the button he used to resolve the issue. No luck)
Do I need to install a VGA driver or something else?
Is there an online manual ?( I couldn't find one of the ONDA website.)
Been struggling for 2 days with the ONDA B250 BTC-D8P MoBo Ver.1 MoBo....
SNIP.....
EDIT: i have looked for documentation; cant find any
SNIP.....
EDIT: i have looked for documentation; cant find any
Thx.
I have a couple G4400 CPUs on other MoBos. I'll move one to the ONDA and start over.
Fingers crossed.
Well changing to the G4400 didn't make a difference. Just like before, The fans on the GPUs and the CPU start spinning and nothing else happens. Not even a light on the Ethernet port.
So, I'm giving up and sending it back. Am looking at alternative boards ...but likely have to go with risers.
I had the same behavior with a Delta PSU in combination with a Biostar TB250 BTC pro Mobo... the fans start spinning but no boot. I managed to start it by slowly removing the 4 pin CPU connector from the Mobo and put it back, all this during the rig being connected to power...