[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 3.14.0-xilinx-gb190cb0-dirty (lzq@armdev2) (gcc version 4.8.3 20140320 (prerelease) (Sourcery CodeBench Lite 2014.05-23) ) #57 SMP PREEMPT Fri Dec 9 14:49:22 CST 2016
[    0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=18c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine model: Xilinx Zynq
[    0.000000] cma: CMA: reserved 128 MiB at 16800000
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] On node 0 totalpages: 126976
[    0.000000] free_area_init_node: node 0, pgdat c0740a40, node_mem_map debd8000
[    0.000000]   Normal zone: 992 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 126976 pages, LIFO batch:31
[    0.000000] PERCPU: Embedded 8 pages/cpu @debc1000 s9088 r8192 d15488 u32768
[    0.000000] pcpu-alloc: s9088 r8192 d15488 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 125984
[    0.000000] Kernel command line: noinitrd mem=496M console=ttyPS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs rw rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 364356K/507904K available (5032K kernel code, 283K rwdata, 1916K rodata, 204K init, 258K bss, 143548K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xdf800000 - 0xff000000   ( 504 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xdf000000   ( 496 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc06d1374   (6949 kB)
[    0.000000]       .init : 0xc06d2000 - 0xc0705380   ( 205 kB)
[    0.000000]       .data : 0xc0706000 - 0xc074cf78   ( 284 kB)
[    0.000000]        .bss : 0xc074cf84 - 0xc078d9fc   ( 259 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] ps7-slcr mapped to df802000
[    0.000000] zynq_clock_init: clkc starts at df802100
[    0.000000] Zynq clock init
[    0.000015] sched_clock: 64 bits at 333MHz, resolution 3ns, wraps every 3298534883328ns
[    0.000308] ps7-ttc #0 at df804000, irq=43
[    0.000615] Console: colour dummy device 80x30
[    0.000645] Calibrating delay loop... 1325.46 BogoMIPS (lpj=6627328)
[    0.040208] pid_max: default: 32768 minimum: 301
[    0.040432] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.040450] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.042611] CPU: Testing write buffer coherency: ok
[    0.042945] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.043004] Setting up static identity map for 0x4c4af8 - 0x4c4b50
[    0.043222] L310 cache controller enabled
[    0.043242] l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x72760000, Cache size: 512 kB
[    0.121032] CPU1: Booted secondary processor
[    0.210228] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.210359] Brought up 2 CPUs
[    0.210379] SMP: Total of 2 processors activated.
[    0.210387] CPU: All CPU(s) started in SVC mode.
[    0.211048] devtmpfs: initialized
[    0.213471] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[    0.214690] regulator-dummy: no parameters
[    0.222383] NET: Registered protocol family 16
[    0.224630] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.226922] cpuidle: using governor ladder
[    0.226936] cpuidle: using governor menu
[    0.234329] syscon f8000000.ps7-slcr: regmap [mem 0xf8000000-0xf8000fff] registered
[    0.235847] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
[    0.235862] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.235973] zynq-ocm f800c000.ps7-ocmc: ZYNQ OCM pool: 256 KiB @ 0xdf880000
[    0.257588] bio: create slab at 0
[    0.258989] vgaarb: loaded
[    0.259677] SCSI subsystem initialized
[    0.260766] usbcore: registered new interface driver usbfs
[    0.260943] usbcore: registered new interface driver hub
[    0.261191] usbcore: registered new device driver usb
[    0.261717] media: Linux media interface: v0.10
[    0.261878] Linux video capture interface: v2.00
[    0.262123] pps_core: LinuxPPS API ver. 1 registered
[    0.262135] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[    0.262258] PTP clock support registered
[    0.262625] EDAC MC: Ver: 3.0.0
[    0.263664] Advanced Linux Sound Architecture Driver Initialized.
[    0.266510] DMA-API: preallocated 4096 debug entries
[    0.266524] DMA-API: debugging enabled by kernel config
[    0.266603] Switched to clocksource arm_global_timer
[    0.287089] NET: Registered protocol family 2
[    0.287737] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.287795] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[    0.287879] TCP: Hash tables configured (established 4096 bind 4096)
[    0.287923] TCP: reno registered
[    0.287941] UDP hash table entries: 256 (order: 1, 8192 bytes)
[    0.287973] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[    0.288217] NET: Registered protocol family 1
[    0.288515] RPC: Registered named UNIX socket transport module.
[    0.288527] RPC: Registered udp transport module.
[    0.288535] RPC: Registered tcp transport module.
[    0.288544] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.288557] PCI: CLS 0 bytes, default 64
[    0.288990] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[    0.290995] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.293129] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.293310] msgmni has been set to 967
[    0.294108] io scheduler noop registered
[    0.294122] io scheduler deadline registered
[    0.294165] io scheduler cfq registered (default)
[    0.305494] dma-pl330 f8003000.ps7-dma: Loaded driver for PL330 DMAC-2364208
[    0.305514] dma-pl330 f8003000.ps7-dma: DBUFF-128x8bytes Num_Chans-8 Num_Peri-4 Num_Events-16
[    0.427858] e0001000.serial: ttyPS0 at MMIO 0xe0001000 (irq = 82, base_baud = 3124999) is a xuartps
[    0.995295] console [ttyPS0] enabled
[    0.999572] xdevcfg f8007000.ps7-dev-cfg: ioremap 0xf8007000 to df866000
[    1.007205] [drm] Initialized drm 1.1.0 20060810
[    1.024293] brd: module loaded
[    1.033657] loop: module loaded
[    1.043088] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.048870] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    1.057090] libphy: XEMACPS mii bus: probed
[    1.061456] ------------- phy_id = 0x3625e62
[    1.066197] xemacps e000b000.ps7-ethernet: pdev->id -1, baseaddr 0xe000b000, irq 54
[    1.074789] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.081496] ehci-pci: EHCI PCI platform driver
[    1.088747] zynq-dr e0002000.ps7-usb: Unable to init USB phy, missing?
[    1.095545] usbcore: registered new interface driver usb-storage
[    1.102432] mousedev: PS/2 mouse device common for all mice
[    1.108587] i2c /dev entries driver
[    1.115459] zynq-edac f8006000.ps7-ddrc: ecc not enabled
[    1.120996] cpufreq_cpu0: failed to get cpu0 regulator: -19
[    1.126935] Xilinx Zynq CpuIdle Driver started
[    1.131795] sdhci: Secure Digital Host Controller Interface driver
[    1.137975] sdhci: Copyright(c) Pierre Ossman
[    1.142248] sdhci-pltfm: SDHCI platform and OF driver helper
[    1.149069] mmc0: no vqmmc regulator found
[    1.153084] mmc0: no vmmc regulator found
[    1.196627] mmc0: SDHCI controller on e0100000.ps7-sdio [e0100000.ps7-sdio] using ADMA
[    1.205317] usbcore: registered new interface driver usbhid
[    1.210837] usbhid: USB HID core driver
[    1.215536] nand: device found, Manufacturer ID: 0x2c, Chip ID: 0xda
[    1.221826] nand: Micron MT29F2G08ABAEAWP
[    1.225796] nand: 256MiB, SLC, page size: 2048, OOB size: 64
[    1.231743] Bad block table found at page 131008, version 0x01
[    1.237987] Bad block table found at page 130944, version 0x01
[    1.244044] 3 ofpart partitions found on MTD device pl353-nand
[    1.249819] Creating 3 MTD partitions on "pl353-nand":
[    1.254921] 0x000000000000-0x000002000000 : "BOOT.bin-env-dts-kernel"
[    1.262965] 0x000002000000-0x00000b000000 : "angstram-rootfs"
[    1.270288] 0x00000b000000-0x000010000000 : "upgrade-rootfs"
[    1.279243] TCP: cubic registered
[    1.282477] NET: Registered protocol family 17
[    1.287198] Registering SWP/SWPB emulation handler
[    1.293101] regulator-dummy: disabling
[    1.297498] UBI: attaching mtd1 to ubi0
[    1.607464] UBI: scanning is finished
[    1.628122] UBI: volume 0 ("rootfs") re-sized from 192 to 1108 LEBs
[    1.635194] UBI: attached mtd1 (name "angstram-rootfs", size 144 MiB) to ubi0
[    1.642271] UBI: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[    1.649034] UBI: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[    1.655698] UBI: VID header offset: 2048 (aligned 2048), data offset: 4096
[    1.662575] UBI: good PEBs: 1152, bad PEBs: 0, corrupted PEBs: 0
[    1.668556] UBI: user volume: 1, internal volumes: 1, max. volumes count: 128
[    1.675663] UBI: max/mean erase counter: 1/0, WL threshold: 4096, image sequence number: 1555284814
[    1.684706] UBI: available PEBs: 0, total reserved PEBs: 1152, PEBs reserved for bad PEB handling: 40
[    1.693923] UBI: background thread "ubi_bgt0d" started, PID 1080
[    1.693928] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.697896] ALSA device list:
[    1.697899]   No soundcards found.
[    1.716496] UBIFS: background thread "ubifs_bgt0_0" started, PID 1082
[    1.826711] UBIFS: mounted UBI device 0, volume 0, name "rootfs"
[    1.832639] UBIFS: LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[    1.841770] UBIFS: FS size: 128626688 bytes (122 MiB, 1013 LEBs), journal size 9023488 bytes (8 MiB, 72 LEBs)
[    1.851654] UBIFS: reserved for root: 0 bytes (0 KiB)
[    1.856695] UBIFS: media format: w4/r0 (latest is w4/r0), UUID DA26756C-5179-4D43-A54D-86DC20901F44, small LPT model
[    1.888759] VFS: Mounted root (ubifs filesystem) on device 0:11.
[    1.957199] devtmpfs: mounted
[    1.960309] Freeing unused kernel memory: 204K (c06d2000 - c0705000)
[    3.167544] random: dd urandom read with 0 bits of entropy available
[    3.786646]
[    3.786646] bcm54xx_config_init
[    4.566620]
[    4.566620] bcm54xx_config_init
[    7.567484] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[    7.573580] xemacps e000b000.ps7-ethernet: link up (100/FULL)
[   22.009849] In axi fpga driver!
[   22.012922] request_mem_region OK!
[   22.016308] AXI fpga dev virtual address is 0xdf9fc000
[   22.021453] *base_vir_addr = 0x8c510
[   22.037408] In fpga mem driver!
[   22.040473] request_mem_region OK!
[   22.044036] fpga mem virtual address is 0xe2000000
[   22.806621]
[   22.806621] bcm54xx_config_init
[   23.436648]
[   23.436648] bcm54xx_config_init
[   26.437478] xemacps e000b000.ps7-ethernet: Set clk to 24999999 Hz
[   26.443498] xemacps e000b000.ps7-ethernet: link up (100/FULL)
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
Find Force Freq=600 will search Freq again!
DETECT HW version=0008c510
miner ID : 8054e4411375885c
config file found, will disable freq setting.
Miner Type = S9
AsicType = 1387
real AsicNum = 63
Find /tmp/searcherror: F:1  The last log is below:
This is XILINX board. Totalram:       507527168
Detect 512MB control board of XILINX
Find Force Freq=600 will search Freq again!
DETECT HW version=0008c510
miner ID : 8054e4411375885c
config file found, will disable freq setting.
Miner Type = S9
AsicType = 1387
real AsicNum = 63
use critical mode to search freq...
get PLUG ON=0x000000e0
Find hashboard on Chain[5]
Find hashboard on Chain[6]
Find hashboard on Chain[7]
set_reset_allhashboard = 0x0000ffff
Check chain[5] PIC fw version=0x03
Check chain[6] PIC fw version=0x03
Check chain[7] PIC fw version=0x03
chain[5]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Start search freq on chain[5]...
Check chain[5] PIC fw version=0x03
chain[6]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Start search freq on chain[6]...
Check chain[6] PIC fw version=0x03
chain[7]: [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255] [63:255]
Start search freq on chain[7]...
Check chain[7] PIC fw version=0x03
get PIC voltage=6 on chain[5], value=940
get PIC voltage=6 on chain[6], value=940
get PIC voltage=6 on chain[7], value=940
set voltage=860 search freq on chain[5]
now set pic voltage=142 on chain[5]
set voltage=860 search freq on chain[6]
now set pic voltage=142 on chain[6]
set voltage=860 search freq on chain[7]
now set pic voltage=142 on chain[7]
enable_pic_dac on chain[5]
enable_pic_dac on chain[6]
enable_pic_dac on chain[7]
set_reset_allhashboard = 0x00000000
chain[5] temp offset record: 62,0,0,0,0,0,35,28
chain[5] temp chip I2C addr=0x98
chain[5] has no middle temp, use special fix mode.
chain[6] temp offset record: 62,0,0,0,0,0,35,28
chain[6] temp chip I2C addr=0x98
chain[6] has no middle temp, use special fix mode.
chain[7] temp offset record: 62,0,0,0,0,0,35,28
chain[7] temp chip I2C addr=0x98
chain[7] has no middle temp, use special fix mode.
set_reset_allhashboard = 0x0000ffff
set_reset_allhashboard = 0x00000000
CRC error counter=0
set command mode to VIL

--- check asic number
check chain[5]: asicNum = 63
check chain[6]: asicNum = 63
check chain[7]: asicNum = 63
After Get ASIC NUM CRC error counter=0
set_baud=0
SEARCH_FREQ_TEST_LEVEL mode set freq=650 voltage=860 on chain[5]
SEARCH_FREQ_TEST_LEVEL mode set freq=650 voltage=860 on chain[6]
SEARCH_FREQ_TEST_LEVEL mode set freq=650 voltage=860 on chain[7]
The min freq=650
set real timeout 56, need sleep=408576
start send works on chain[5]
start send works on chain[6]
start send works on chain[7]
get send work num :57456 on Chain[5]
get send work num :57456 on Chain[6]
get send work num :57456 on Chain[7]
wait recv nonce on chain[5]
wait recv nonce on chain[6]
wait recv nonce on chain[7]
get nonces on chain[5]
require nonce number:912
require validnonce number:57456


freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650
freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=650 freq[12]=650 freq[13]=650 freq[14]=650 freq[15]=650
freq[16]=650 freq[17]=650 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=650 freq[53]=650 freq[54]=650 freq[55]=650
freq[56]=650 freq[57]=650 freq[58]=650 freq[59]=650 freq[60]=650 freq[61]=650 freq[62]=650

total valid nonce number:27000
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:6695
last_nonce_num:2666
get nonces on chain[6]
require nonce number:912
require validnonce number:57456


freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650
freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=650 freq[12]=650 freq[13]=650 freq[14]=650 freq[15]=650
freq[16]=650 freq[17]=650 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=650 freq[53]=650 freq[54]=650 freq[55]=650
freq[56]=650 freq[57]=650 freq[58]=650 freq[59]=650 freq[60]=650 freq[61]=650 freq[62]=650

total valid nonce number:57119
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:13948
last_nonce_num:2994
get nonces on chain[7]
require nonce number:912
require validnonce number:57456


freq[00]=650 freq[01]=650 freq[02]=650 freq[03]=650 freq[04]=650 freq[05]=650 freq[06]=650 freq[07]=650
freq[08]=650 freq[09]=650 freq[10]=650 freq[11]=650 freq[12]=650 freq[13]=650 freq[14]=650 freq[15]=650
freq[16]=650 freq[17]=650 freq[18]=650 freq[19]=650 freq[20]=650 freq[21]=650 freq[22]=650 freq[23]=650
freq[24]=650 freq[25]=650 freq[26]=650 freq[27]=650 freq[28]=650 freq[29]=650 freq[30]=650 freq[31]=650
freq[32]=650 freq[33]=650 freq[34]=650 freq[35]=650 freq[36]=650 freq[37]=650 freq[38]=650 freq[39]=650
freq[40]=650 freq[41]=650 freq[42]=650 freq[43]=650 freq[44]=650 freq[45]=650 freq[46]=650 freq[47]=650
freq[48]=650 freq[49]=650 freq[50]=650 freq[51]=650 freq[52]=650 freq[53]=650 freq[54]=650 freq[55]=650
freq[56]=650 freq[57]=650 freq[58]=650 freq[59]=650 freq[60]=650 freq[61]=650 freq[62]=650

total valid nonce number:53087
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:12940
last_nonce_num:2707
checkBoardState chain[5] rate=1354 bad_chip_num=44 lowest rate=4666 ret=1
checkBoardState chain[6] rate=4593 bad_chip_num=1 lowest rate=4666 ret=0
Detect Higher Rate = 4593 > 0 on chain[6] freq=650 voltage=860
checkBoardState chain[7] rate=3896 bad_chip_num=10 lowest rate=4666 ret=1
After TEST CRC error counter=0
check FAN Speed: fan[2] speed=6120
check FAN Speed: fan[2] speed=6120
check FAN Speed: fan[2] speed=6120
check FAN ERROR: fan num=1 , ought to be 2