Ninjastic
Home
Search
Users
Boards
Addresses
Ctrl + K
Toggle theme
Open menu
Post
Edited versions
Quotes to this post
Post
26151485
Topic
2485365
Board
Mining support
Re: Bitmain Antminer S9 Troubleshooting Blank Hardware Version
by
MikeyKing
on
11/12/2017, 16:48:46 UTC
Now all the hash boars are lighting up...
kernel still says this at the end..
"
total valid nonce number:52636
total send work number:57456
require valid nonce number:57456
repeated_nonce_num:0
err_nonce_num:12837
last_nonce_num:2795
checkBoardState chain[5] rate=1294 bad_chip_num=45 lowest rate=4666 ret=1
checkBoardState chain[6] rate=4593 bad_chip_num=1 lowest rate=4666 ret=0
Detect Higher Rate = 4593 > 0 on chain[6] freq=650 voltage=860
checkBoardState chain[7] rate=3896 bad_chip_num=10 lowest rate=4666 ret=1
After TEST CRC error counter=0
check FAN Speed: fan[2] speed=6120
check FAN Speed: fan[2] speed=6120
check FAN Speed: fan[2] speed=6120
check FAN ERROR: fan num=1 , ought to be 2
post search failed code: F:1
post:
http://192.168.60.104/mms/postfailedcode.do?minertype=S9&minerID=8054e4411375885c&failedCode=F:1
ERROR: Failed to fetch url (
http://192.168.60.104/mms/postfailedcode.do?minertype=S9&minerID=8054e4411375885c&failedCode=F:1
) - curl said: Timeout was reached
post:
http://10.70.22.1/mms/postfailedcode.do?minertype=S9&minerID=8054e4411375885c&failedCode=F:1
ERROR: Failed to fetch url (
http://10.70.22.1/mms/postfailedcode.do?minertype=S9&minerID=8054e4411375885c&failedCode=F:1
) - curl said: Couldn't connect to server
post:
http://10.72.3.11/mms/postfailedcode.do?minertype=S9&minerID=8054e4411375885c&failedCode=F:1
ERROR: Failed to fetch url (
http://10.72.3.11/mms/postfailedcode.do?minertype=S9&minerID=8054e4411375885c&failedCode=F:1
) - curl said: Couldn't connect to server "