Re: [ANN] [CPU mining] Yenten v1.2.1 [YTN] [YescryptR16] [Exchange avilable]
Hey guys i am new here
I am using an odroid xu4 for mining and got an ubuntu as OS.
I installed and compiled the MinerD for Yescrypt but i only get rejecteds (boooos)
so where am i able to download the miner with yescryptr16
thanks for any help
Check out this post:I am using an odroid xu4 for mining and got an ubuntu as OS.
I installed and compiled the MinerD for Yescrypt but i only get rejecteds (boooos)
so where am i able to download the miner with yescryptr16
thanks for any help
Found the minerd source at https://github.com/conan-equal-newone/yenten/releases, all I had to do to get running:
To build yentend I followed the readme except the two steps mentioned above.
The 4 big cores report 0.02kH/s each, the 4 little cores 0.01kH/s. So with proper cooling I would get at least 120H/s, only running the 4 big cores atm.
The CFLAGS are for Odroid XU3 but should work fine with Odroid XU4 as well.Code:
apt-get install build-essential autotools-dev autoconf libcurl3 libcurl4-gnutls-dev jansson
wget https://github.com/conan-equal-newone/yenten/releases/download/1.1.0/yenten_minerd_source.zip
unzip yenten_minerd_source.zip
Edit line 6 of configure.ac: AM_INIT_AUTOMAKE([gnu foreign])
chmod +x autogen.sh
./autogen.sh
./configure CFLAGS="-O3 -funroll-loops -fomit-frame-pointer -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard"
make
strip minerd
-march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard will be different for most ARM devices, look up the recommended CFLAGS for your device.wget https://github.com/conan-equal-newone/yenten/releases/download/1.1.0/yenten_minerd_source.zip
unzip yenten_minerd_source.zip
Edit line 6 of configure.ac: AM_INIT_AUTOMAKE([gnu foreign])
chmod +x autogen.sh
./autogen.sh
./configure CFLAGS="-O3 -funroll-loops -fomit-frame-pointer -march=armv7-a -mfpu=vfpv3-d16 -mfloat-abi=hard"
make
strip minerd
To build yentend I followed the readme except the two steps mentioned above.
The 4 big cores report 0.02kH/s each, the 4 little cores 0.01kH/s. So with proper cooling I would get at least 120H/s, only running the 4 big cores atm.
so moment of truth. Got my alfawise x5 running and got 90 hashes per sec running 4 threads in the wallet. I am using a kill-a-watt power guage and it says 7 watts while mining; 12.86 hashes/watt. Do you have a kill-a-watt to test your odroid?
Sorry no wattmeter, but the Odroid XU3 is said to consume max. 20W with all cores and GPU on full load. I guess it's around 15W when mining on all eight cores.Anyone got a Raspi, NanoPi or Odroid C1? A farm of cheap ARM boards could be quite competitive.
