Thanks for all the support, I am working hard on the background to improve things. As I also do respect all your opinions I decided the following for the next versions:
- My intention is not to discourage you to change / play with the settings, so the dev mining will start after 5 minutes instead of 2 minutes. This will give you time to grab a coffee / check your settings / correct it if you see a lot of HW errors / do multiple settings at once after a restart before it starts mining on the dev pool.
- The dev fee pools are shown again in the mining status overview (light grey colored) and also in the kernel log, so everybody can check / see what's going on. If you still have questions about it, please ask friendly in this topic.
Hi Blissz,
After the smooth upgrade to 10/12:
I get this on restarts:
ec 12 05:56:01 (none) local0.notice cgminer[15007]: set_frequency: frequency = 512
Dec 12 05:56:01 (none) local0.notice cgminer[15007]: set_frequency: frequency = 519
Dec 12 05:56:01 (none) local0.notice cgminer[15007]: set_frequency: frequency = 487
Dec 12 05:56:01 (none) local0.notice cgminer[15007]: set_frequency: frequency = 487
Dec 12 05:56:01 (none) local0.notice cgminer[15007]: software_set_address: chain 0 has 60 ASIC, and addrInterval is 1
Dec 12 05:56:01 (none) local0.notice cgminer[15007]: Now Set
Dec 12 05:56:02 (none) local0.notice cgminer[15007]: software_set_address: chain 1 has 60 ASIC, and addrInterval is 1
Dec 12 05:56:02 (none) local0.notice cgminer[15007]: Now Set [1] Chain Address
Dec 12 05:56:02 (none) local0.notice cgminer[15007]: software_set_address: chain 2 has 60 ASIC, and addrInterval is 1
Dec 12 05:56:02 (none) local0.notice cgminer[15007]: Now Set [2] Chain Address
Dec 12 05:56:03 (none) local0.notice cgminer[15007]: software_set_address: chain 3 has 0 ASIC, and addrInterval is 1
Dec 12 05:56:03 (none) local0.notice cgminer[15007]: enable_read_temperature_from_asic: reg_value = 0x07007a61
Dec 12 05:56:03 (none) local0.notice cgminer[15007]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 12 05:56:04 (none) local0.warn cgminer[15007]: set_temperature_offset_value
Dec 12 05:56:05 (none) local0.notice cgminer[15007]: set_temperature_offset_value: Chain0 Sensor0 temp offset : -3,
Dec 12 05:56:05 (none) local0.notice cgminer[15007]: set_temperature_offset_value: Chain1 Sensor0 temp offset : -2,
Dec 12 05:56:06 (none) local0.notice cgminer[15007]: set_temperature_offset_value: Chain2 Sensor0 temp offset : -3,
Dec 12 05:56:06 (none) local0.notice cgminer[15007]: frequency = '531'
Dec 12 05:56:06 (none) local0.notice cgminer[15007]: dev.timeout = 568692 us
Dec 12 05:56:06 (none) local0.notice cgminer[15007]: open_core
Dec 12 05:56:09 (none) local0.err cgminer[15007]: low hashrate detection trigger: 15920.784000 Gh/s
Dec 12 05:56:09 (none) local0.notice cgminer[15007]: set voltage = 1399.777148 real:115 mv
Dec 12 05:56:09 (none) local0.notice cgminer[15007]: set_PIC16F1704_voltage_new ok, voltage = 0x87
Dec 12 05:56:10 (none) local0.notice cgminer[15007]: set_PIC16F1704_voltage_new ok, voltage = 0x87
Dec 12 05:56:10 (none) local0.notice cgminer[15007]: set_PIC16F1704_voltage_new ok, voltage = 0x7d
Dec 12 05:56:11 (none) local0.err cgminer[15007]: cgminer time error total_secs = 1513058171.033079 last_total_secs = 1.000000
Dec 12 05:56:17 (none) local0.warn cgminer[15007]: API running in IP access mode on port 4028 (15)
Dec 12 05:57:45 (none) local0.warn cgminer[15007]: Switching to pool 3 stratum+tcp://dash.suprnova.cc:9991
Dec 12 05:59:35 (none) local0.warn cgminer[15007]: Switching to pool 0 stratum+tcp://italyiimp.com:3533
It now takes 5 (4:35) minutes to get to my pool and start mining on a restart.
Since your pool was down a couple days ago, It said WTF! no pool. I thought that was funny, but its not.
It started this api program, to find a way to mine dev. i think?
It does this at every restart since.
thanks for your help.
All other options working fine,
M