I have got my moonlander 2 & facing couple of issues,
I have connected the USB device to my laptop with clock set to the lowest frequency ("--set MLD:clock=384"). I'm using the low frequency setting until i get my new USB HUB. The issue is the hashing stops/halts after running for few minutes. Below are the two cases i have observed.
case 1:
hashing stops/halts when it encounters "stratum connection to pool 0 interrupted". I have waited for almost 30 minutes after this last message in my screenshot & it never progressed.
https://imgur.com/rpn2Fre
Please help me if I'm missing anything here or to tweak anything to make it run continuously without restarts for every few minutes.
Thank you.
I have connected the USB device to my laptop with clock set to the lowest frequency ("--set MLD:clock=384"). I'm using the low frequency setting until i get my new USB HUB. The issue is the hashing stops/halts after running for few minutes. Below are the two cases i have observed.
case 1:
hashing stops/halts when it encounters "stratum connection to pool 0 interrupted". I have waited for almost 30 minutes after this last message in my screenshot & it never progressed.
https://imgur.com/rpn2Fre
Please help me if I'm missing anything here or to tweak anything to make it run continuously without restarts for every few minutes.
Thank you.
I'm getting this exact same problem on my moonlander2. After mining for a few hours, the stratum connection is interrupted and the GPU hangs. Once I manually reset it, it works fine.
Does anyone know for a way to auto-restart bfgminer if this specifically happens? Or know why this is happening? I'm running Windows 7.
I hope this isn't the only solution:
Anyone have a good solution on Windows to just kill bfgminer and restart from bat file every 30 or 60 minutes?
https://stackoverflow.com/questions/15602687/batch-file-restart-program-after-every-20-minutes
I'm able to address this problem by tweaking USB port power options. Follow these steps & it should fix your's,
1) Plug in moonlander 2 to the computer.
2) Open device manager on windows machine.
3) Under USB controllers identify the USB port to which the moonlander 2 is connected to.
4) Right click that particular USB port & select the properties.
5) Under the last tab 'Power Management', un-check the option of "Allow the computer to turn off this device to save power".
6) If possible restart the computer & try again. It works for me.
Hope this helps...Happy Mining
