Re: [Work in progess] Burnins Avalon Chip to mining board service
awesome update! 
Can someone confirm this one will do for 15 modules
http://www.coolermaster.com/product/Detail/powersupply/silent-pro-m2/silent-pro-m2-720w.html
Input Voltage 90-264Vac (Auto Range)
Input Current 11 – 5.5A
Input Frequency Range 47 - 63Hz
PFC Active PFC (>0.9)
Power Good Signal 100-500ms
Hold Up Time >17ms
Efficiency 85% Typically
MTBF 100,000 Hours
Protection OVP/UVP/OCP/OPP/OTP/SCP
Output Capacity 720W
Operation Temperature 0~40°C (Nominal Input Voltage)
Regulatory TUV / CE / UL / FCC / BSMI / GOST / C-tick / KC / CCC
Fan 135mm Hydraulic Dynamic Bearings
Certifications 80 Plus Bronze
Connector M/B 24 Pin Connector x 1
CPU 4+4 Pin x 1
PCI-E 6+2 Pin x 4
SATA x 9
4 Pin Peripheral x 5
4 Pin Floppy x 1
Thanks.
Can someone confirm this one will do for 15 modules
http://www.coolermaster.com/product/Detail/powersupply/silent-pro-m2/silent-pro-m2-720w.html
Input Voltage 90-264Vac (Auto Range)
Input Current 11 – 5.5A
Input Frequency Range 47 - 63Hz
PFC Active PFC (>0.9)
Power Good Signal 100-500ms
Hold Up Time >17ms
Efficiency 85% Typically
MTBF 100,000 Hours
Protection OVP/UVP/OCP/OPP/OTP/SCP
Output Capacity 720W
Operation Temperature 0~40°C (Nominal Input Voltage)
Regulatory TUV / CE / UL / FCC / BSMI / GOST / C-tick / KC / CCC
Fan 135mm Hydraulic Dynamic Bearings
Certifications 80 Plus Bronze
Connector M/B 24 Pin Connector x 1
CPU 4+4 Pin x 1
PCI-E 6+2 Pin x 4
SATA x 9
4 Pin Peripheral x 5
4 Pin Floppy x 1
Thanks.
Theoretically it is sufficient, but its at the limit particularly regarding to the efficiency. I would suggest the next size that is >= 850 W. The 720 W also has no buffer for possible overclocking. But even without overclocking I would suggest a larger one.