Hey everyone !

I'm facing a problem with a, ASUS Z270-P mobo, and a SAPPHIRE VEGA 64 graphic card. I've been following closely this tutorial : http://vega.miningguides.com/ and yet, after 2 days of countless installs, BIOS settings, DDU abusing, I just can't get it working. Like not even got close to it.

Not 4, not 6 not 8 of them.

One.

One, only...

Seems like it's the problem comes from the mother board [still in this state of strong denial, that the GPU should go to RMA] and I've only used H81, so far. I'm not familiar with this very Z270-P model, but never expected THAT much difficulty to make it work...

+ Mobo BIOS up-to-date ver.0812 [should I downgade it ?]

+ BIOS Setup :

-----DMI Max Link Speed -> Gen2/Gen3
-----PCIEX16_1 link speed -> Gen 2/Gen3
-----PCI Express Configuration -> Gen 2/Gen3
-----Enabled(above 4G)
-----Few stuff like HD audio disabled, and so on...

+ Fresh W10 install [UEFI]

+ Device manager detects the new hardware

+ Blockchain driver - Inevitably fails with BSOD atikmpag.sys issue [both W7 and W10] before finishing

+ Tried every single PCIe port

+ Changed riser enough times to get pretty confident in the fact that the problem doesn't come from this part

Any help ?