Thank You Blissz for your custom firmware. version tested v1.12 from 10 december.
I want to mention this custom firmware is good for undervolt option the overclock i dont know i dont try it.
i want to mention the efficency are the same as stock firmware or maybe slightr better the Blissz firmware.
Because on stock firmware my D3 run at 1050W = 19Ghz with Blissz frimware(lowest voltage option) run with 610-630W = ~15Ghz
And i think this is good for hot summer or if noise is a problem.
i want to say my power supply is APW5(2600W on 220v) from Bitmain.
And i think is a litell bit unestable ... on antpool its like mountain up and down the hashrate(see picture).
i let you some picture.
https://imgur.com/ZxFg4Cjhttps://imgur.com/wi4D3Sohttps://imgur.com/CNlssArhttps://imgur.com/2kuM1KThttps://imgur.com/orbauDUhttps://imgur.com/o6bEtM1PD: This are the value of your question micairvas see picture.
If lowest voltage option is set on autotune, how far cpu frequency can go and what is max power consumption on lowest voltage?