Hey everyone !
I'm facing a problem with a, ASUS Z270-P mobo, and a SAPPHIRE VEGA 64 graphic card. I've been following closely this tutorial :
http://vega.miningguides.com/ and yet, after 2 days of countless installs, BIOS settings, DDU abusing, I just can't get it working. Like not even got close to it.
I read somewhere that these particular mobos are pretty difficult to get running. I've only used H81, so far, and as all seems to point to this very part of the machine, I was wondering if anyone had troubles with it, and could share his experience [and eventually the solution]
+ Mobo BIOS up-to-date [but read somewhere, once, it had to be downgraded to earlier versions]
+ BIOS Setup :
-----DMI Max Link Speed -> Gen2/Gen3
-----PCIEX16_1 link speed -> Gen 2/Gen3
-----PCI Express Configuration -> Gen 2/Gen3
-----Enabled(above 4G)
+ Fresh W10 install [UEFI]
+ Blockchain driver - Inevitably fails with BSOD atikmpag.sys issue [both W7 and W10] before finishing
Any help ?
I have a rig of 5 x gtx 1080ti and one vega56 (flashed as vega64) working on this mainboard
actually everything working good from the first time as I added the vega
hm.
try this one, remove all vegas, start your rig on internal vga, flash new bios, load defaults, save restart
then enter bios and set 4G decoding and every where PCIE GEN2, disable sound and serial port
add through riser one Vega = check it would work, if yes add one by one the rest