Re: Antminer D3 Blissz firmware (10/12 v1.12 update)

hi @blissz,

do you know who is this guy "koffee.1" after 24 hours, with firmware v1.11 the D3 worker changed to that guy ?
my D3 is rented !

I have no clue really...

Hi Blissz,

your firmware is really cool, i love it very much.
But the fact is that , I tried with firmware 1.11 and 1.12, after almost a day running , suddenly my worker is changed to "koffee.1".
It is really strange . My renter at MRR inform it to me, that the D3 does not work for him anymore.

I sadly have to back to stock firmware.

Please investigate the case, find out issue, so that i could come back to your awsome firmware.

Thanks

I'm pretty sure someone is on your network changing it then. Update passwords

Thanks Blissz,

It is my home-network only with kid and grandmother. anyway i changed D3's password.
Is there any possibility that the back-door is in the D3-machine ( not to offend you, but may be from local vendor, from Bitman ) ?

I have to agree with blissz on this, I've had something like it happen before. I had a dmz setup but all the miners were dhcp, power went out and when it came back up one of the miners took the dmz spot (this was years ago with an s1 and I had not changed stock pw) it wasn't long before it was mining for someone else. I'm pretty sure several people out there have bots running just looking to get into miners and then alerts them they can get in. Likely it wasn't anyone driving by getting into wifi, it was from outside your network. That's where I will lay my bets. Maybe do a port scan and see what all is open on your network?

You are correct about the bot, DMZ, and D3 default password. I correct it, and will try the firmware v1.12 again.

Thank you