I have attached the following pinned message from Discord (found under general) to fix connection issues..

==========================================================================================================
SkyHyperV - Yesterday at 6:29 PM
For all wallets, please use the following instructions:

1. Download the correct chain bootstrap (this will get you past the recent conflicted block): https://drive.google.com/open?id=1RkkqK3kMr8NGbNQoAAiLM07Ns3NvYTSk

2. Edit your b3coin.conf file:

2a. For Staking wallet, replace your entire b3coin.conf file with the contents below

2b. For FN wallet, keep your FN configuration in place and replace any connect/addnodes lines with the contents below

3. Connect to FN reference node:

3a. For Staking wallet, run: fundamentalnode connect 18.217.191.50:5647

3b. For FN wallet, make sure you are using the bootstrap, connected to peers and fully synced then start your FN (fundamentalnode start) then run: fundamentalnode connect 18.217.191.50:5647

For Step 2:
seednode=45.77.137.78
seednode=85.214.68.75
seednode=188.68.52.172
seednode=seed0.b3coin.zone
seednode=seed1.b3coin.zone
connect=45.77.137.78
connect=107.172.190.193
connect=23.95.226.145
connect=23.95.231.171
connect=23.95.226.165
connect=107.172.190.190
connect=23.95.229.159
connect=23.95.229.160
connect=45.77.0.138
connect=45.76.139.79
connect=23.95.230.173
connect=23.95.230.171
connect=173.232.230.227
connect=107.172.209.27
connect=23.95.230.172
connect=23.95.231.170
connect=23.95.130.165
connect=107.172.190.190
connect=107.172.190.162
connect=107.172.165.113
connect=18.217.191.50
connect=18.217.185.242(edited)


===========================================================================================================