Looking for advice on psu setup.

Currently have 9 1070ti which use 2x8pin.

Originally was going to use an asrock h110.

Got a 2kw superflower psu in the daily which i had intended to use in the following config:

Psu has x9 8 pin plus cpu 8 pin. (Similar to evga 1600w)

6+2/6 to each gpu. Each /6 with the dual 6 to 8 pin included with the gpu.

All risers powered with sata. Risers are 6 pin with sata adapter.


Have been advised powering the risers with the included 6 pin to sata connectors is a big no no

Struggling to decide on best setup for powering the rig.

Splitting into two 6/6 rigs also an option.

Gpus are zotac amp.

If the inteded setup is not advised, what's the most cost efficient setup....