Post
Topic
Board Mining (Altcoins)
Re: PSU setup for 6+ gpu rig
by
philipma1957
on 15/12/2017, 22:56:55 UTC
Yeah, no issue. Did consider the stock zotac but its a blower which I assumed wouldn't be the best for cooling and noise.

yeah  2x jack 8 pin are not good  for your setup.

most of us don't max the cards  and the cards only go to 180 watts maxed

even these are nice

https://www.amazon.com/MSI-GTX-1070-TI-AERO/dp/B076QDSVB4/ref=sr_1_3?

set to 75% tdp and fans at 75%

they will do close to 500 sols at zec

with 180 core
660 memory

75% tdp and

75% fan.

if you use risers  give them a little extra room  say a 4 inch gap once installed

best way is use 1 pcie cable into the card and into the riser  with an extension like this

https://www.amazon.com/Cable-Matters-2-Pack-6-Pin-Extension/dp/B01DV1Z4EQ/ref=sr_1_8_sspa?


the dual cable powers the card and the riser.  and 1070 ti will be using around 125 watts for the one cable total.

that is why a single eight pin 1070 ti  card is better.