Software info:
Report ver    :  v0019-2.0.002
nvOC (1bash)  :  nvOC v0019-2.0 - Community Release
nvOC (3main)  :  nvOC v0019-2.0 - Community Release   
1bash ver     :  v0019-2.0.002
3main ver     :  v0019-2.0.004                   
5watchdog ver :  v0019-2.0.011   
6tempcontrol v:  v0019-2.0.003   
wtm switch ver:  v0019-2.0.006   
Kernel        :  4.4.0-97-generic
OS            :  Ubuntu 16.04.3 LTS
System        :  (gcc 5.4.0 (Ubuntu 5.4.0-6ubuntu1~16.04.4)
nvidia driver :  387.12
 
Hardware info:
Motherboard   :  ASRock H110 Pro BTC+           
BIOS ver.     :  P1.10 06/20/2017
CPU Model     :  Celeron(R) CPU G3900 @ 2.80GHz
CPU Cores     :  2 (Cores + Threads)
Mem Total     :         8130264 kB
Mem Free      :         5050284 kB
Swap Total    :               0 kB
Swap Free     :               0 kB
Ethernet      :  Intel I219-V (rev 31)

HDD and Partion info:
NAME    SIZE FSTYPE TYPE ROTA HOTPLUG TRAN VENDOR   MODEL             REV MOUNTPOINT
sda    29.9G        disk    1       1 usb  Lexar    USB Flash Drive  PMAP
├─sda1    9M vfat   part    1       1                                     /media/m1/12D3-A8691
└─sda2 13.7G ext4   part    1       1                                     /

VGA info:
01:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
02:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
03:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
04:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
08:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
09:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
0c:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
0d:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)
0e:00.0 VGA compatible controller: NVIDIA Corporation Device 1b82 (rev a1)

1bash settings:
1bash version .............: v0019-2.0.002
LOCAL or REMOTE ...........: LOCAL
TEAMVIEWER started ........: YES
SSH daemon started ........: YES
SLOW_USB_KEY_MODE .........: NO
SRR .......................: NO
Watchdog ..................: YES

Temp Control ..............: YES
TARGET_TEMP ...............: 67
__FAN_ADJUST ..............: 5
POWER_ADJUST ..............: 5
ALLOWED_TEMP_DIFF .........: 2
RESTORE_POWER_LIMIT .......: 90
MINIMAL_FAN_SPEED .........: 40

CLEAR_LOGS_ON_BOOT ........: NO
AUTO_UPDATE ...............: BETA
AUTO_REBOOT ...............: NO
_Parallax_MODE (upPaste)...: NO

TELEGRAM_MESSAGES .: NO
TELEGRAM_ALERTS .: YES
TELEGRAM_TYPE .............: papampi
TELEGRAM_TIMEOUT_IN_MINUTES: 60
TELEGRAM_CHATID ...........: CHATID_NOT_SHOWN
TELEGRAM_APIKEY ...........: APIKEY_NOT_SHOWN

P106_100_FULL_HEADLESS_MODE: NO
GPUPowerMizerMode_Adjust...: NO
POWERLIMIT (global) .......: YES
POWERLIMIT_WATTS ..........: 130
CORE_OVERCLOCK (global)....: 200
MEMORY_OVERCLOCK (global) .: 700
MANUAL_FAN ................: NO
ALGO_SPECIFIC_OC ..........: NO

GLOBAL_WORKERNAME .........: NO
AUTO_WORKERNAME ...........: HOST
WORKERNAME ................: 241
plusCPU ...................: NO

ZM_or_EWBF ................: EWBF
EWBF_VERSION ..............: 3_4
EWBF_PERCENT ..............: 0

COIN ......................: ZEC
ZEC_WORKER ................: 101
ZEC_ADDRESS ...............: acs...
ZEC_POOL ..................: europe.equihash-hub.miningpoolhub.com
ZEC_PORT ..................: 20570

[\code]

I am testing 19.2 but have the problem that the mining process will be terminated, watchdog process too.
Mostly after the miner was switching based on Algo change. Checked also on a second rig with only one 1070TI.
Thanks for your work - any ideas?