didn't found info while googling around so I'll ask here if anyone is willing to help and/or experienced something like this.
couple days ago I managed to build a little farm with ~45 D3s, so far all of them are working nicely except of one,
hashrate drops to 0 after around 10 minutes of working, after rebooting it starts mining on 19Gh/s and then bam and 0. I did try remote steps like resseting, reconfiguring, lowering frequency, etc. but still same.
With my experience in bitmain product in this case I have two options, play with firmware or change the control board itself.
can anyone give any advice?
cheers
I had exactly the same, physically remove all power for atleast one hour solid ! - fixed mine
Thanks, I'll try it as soon as I will get to farm, in the meantime I'm playing around with freqs and so far on 200 miner is working perfectly with 7.113 Ghs, I will add extra freq every 30 minutes and see on what freq the issue rises. Will share of course