Re: Official FutureBit Moonlander 2 Driver and Support Thread
anyone wanna be a real homie and hook ya boi up with the best memory and core voltage + best MLD clock set to reach that 5.5/6 mh/s??
yes you gottas keep them cool. a nice 14" fan is doing the trick. we all miners here why not help eachother out
yes you gottas keep them cool. a nice 14" fan is doing the trick. we all miners here why not help eachother out
I found these listed in the sale of some Moonlander 2's... use these settings at your own risk, I have nothing to verify them with at this time.
However, I'm curious to know if they work.
Quote
dialed-in for balanced power consumption at ~4.5mh/s.
Memory voltage set to ~0.78V. Core voltage set to ~0.725V.
Suggested op frequency at these voltage values is 756 MHz.
Memory voltage set to ~0.78V. Core voltage set to ~0.725V.
Suggested op frequency at these voltage values is 756 MHz.
That looks about right for 756mhz
Nice setup, such a bummer that really no one makes some good hubs and the few out there are that style you have and are crazy expensive.
I think I'm going with some of the anker 60w hubs -- I have some batch 1's coming so hopefully I'll get the bugs worked out before Batch 2 units arrive.
Have you taken any temp readings @ 756? -- Anyone know what the desired temp range is for these things?
When I get my setup I'll post up, I recently picked up a FLIR camera as well so hopefully I can do some illustrations of that.
If you measure with a heatgun on top of the little heatsink (thats the hottest part you can measure), you should be seeing around 60-70c for 756. You don't want to run these past 80c for extended periods of time.