v2.02 beta :: 14/12 :: test version
Download:
https://mega.nz/#!DghG2KwC!OJEK4_d47skRB6yrLRE2bfzlX7FWXLXzgoKA_q5dKco
Changes 14/12:
- fixed auto recover from xxxx
- cleaned up kernel logging
- a bit more aggressive tuning
- tunes down faster now when too many HW errors are detected
Changes 13/12:
- Totally rewritten code base, based from latest available bitmain / cgminer sources
- ASIC's now automatically recovers from xxxxx errors without restarting (The auto reboot options are still in there in case it doesn't succeed)
- blazing fast mining status overview in the webinterface
- as requested: the dev mining starts later now (after 5 minutes)
- as requested: dev pools status is now visible in the miner status
and last but not least...
- added a first version of the auto tune!
When enabled this will search for the best possible frequency at the given voltage setting. The first 5 to 10 minutes it will search for a good base to start from. After that it checks for excessive HW errors every 15 minutes and adjusts the frequency accordingly.
Important: This feature is not completely finished and the startup is a bit slow now.. Therefore I need your help. So what do you need to do:
set your advanced settings the same as displayed bellow
let it run for at least 20 minutes
PM your (complete) kernel log
By doing so I can get to a conclusion what the starting frequency of the auto tune algorithm should be.
In case you want to help more: increase the voltage a bit and do the steps above again as it will give some more information
Thank you!
https://img15.hostingpics.net/pics/453940Untitled.jpg
Download:
https://mega.nz/#!DghG2KwC!OJEK4_d47skRB6yrLRE2bfzlX7FWXLXzgoKA_q5dKco
Changes 14/12:
- fixed auto recover from xxxx
- cleaned up kernel logging
- a bit more aggressive tuning
- tunes down faster now when too many HW errors are detected
Changes 13/12:
- Totally rewritten code base, based from latest available bitmain / cgminer sources
- ASIC's now automatically recovers from xxxxx errors without restarting (The auto reboot options are still in there in case it doesn't succeed)
- blazing fast mining status overview in the webinterface
- as requested: the dev mining starts later now (after 5 minutes)
- as requested: dev pools status is now visible in the miner status
and last but not least...
- added a first version of the auto tune!
When enabled this will search for the best possible frequency at the given voltage setting. The first 5 to 10 minutes it will search for a good base to start from. After that it checks for excessive HW errors every 15 minutes and adjusts the frequency accordingly.
Important: This feature is not completely finished and the startup is a bit slow now.. Therefore I need your help. So what do you need to do:
set your advanced settings the same as displayed bellow
let it run for at least 20 minutes
PM your (complete) kernel log
By doing so I can get to a conclusion what the starting frequency of the auto tune algorithm should be.
In case you want to help more: increase the voltage a bit and do the steps above again as it will give some more information
Thank you!
https://img15.hostingpics.net/pics/453940Untitled.jpg
