Re: Official FutureBit Moonlander 2 Driver and Support Thread
Quick question for anyone here with a Raspberry PI 3 setup....
If I was to use a raspberry pi 3 standalone/headless (ie with no usb hub, keyboard or mouse attached) powered with the official pi power supply (2.5A) can anyone confirm if this will work and what speed they are able to achieve? (With stock voltage settings) ?
Thanks!
If I was to use a raspberry pi 3 standalone/headless (ie with no usb hub, keyboard or mouse attached) powered with the official pi power supply (2.5A) can anyone confirm if this will work and what speed they are able to achieve? (With stock voltage settings) ?
Thanks!
you cant directly plug your moonlander 2 to your PI.
if you use a powered hub it doesnt matter which power supply you use for your PI - it should just be enough to power the PI
They can achieve the speed they get on every other device .. like 5.5mh/s max i run mine on 4.3 mh/s
Greetings - Astrali
Well.....my 7th moonlander turned up today and as my existing hub is now at capacity I thought I would dust off a spare Pi3 & official Pi3 PSU (2.5A). It did manage to plug straight into one of the pi3 USB ports, detected fine. I tried running 600 speed and that works fine but trying the higher speed of 756 fails.