Re: [ANN] [Phantomx] coin -> online currency [PNX] | Pow/PoS X11 Masternode
Hi guys.
Im making masternode but got stuck at step 7, click Start and an error showed: could not allocate vin for collateralAddress.
I followed every step as quick step on website.
Quick instructions to start
1) Start the wallet, go to PhaNtomXNodes menu item, and you will be presented with all running masternodes.
2) Click on My PhaNtomXNodes tab, then click on Create button to start creating your masternode.
3) A window will popup. Name your masternode in Alias field. In Address field type your external address:port
4) Click on button Copy Address and send 20000 PNX to that address. Wait 1 conformation then proceed with setup. Collateral address is your own address.
5) Go back to PhaNtomXNodes menu, select your PhaNtomX masternode and click button Get Config.
6) You must create a file named phantomx.conf. Paste the masternode config you copied before. Go to PhaNtomX folder and place it.
7) Select your PhaNtomX masternode and click button Start. Then restart the wallet.
It didnot work for me. Any idea where I made a mistake?
external address and port I took here: http://www.nirsoft.net/show_my_ip_address.php
Im making masternode but got stuck at step 7, click Start and an error showed: could not allocate vin for collateralAddress.
I followed every step as quick step on website.
Quick instructions to start
1) Start the wallet, go to PhaNtomXNodes menu item, and you will be presented with all running masternodes.
2) Click on My PhaNtomXNodes tab, then click on Create button to start creating your masternode.
3) A window will popup. Name your masternode in Alias field. In Address field type your external address:port
4) Click on button Copy Address and send 20000 PNX to that address. Wait 1 conformation then proceed with setup. Collateral address is your own address.
5) Go back to PhaNtomXNodes menu, select your PhaNtomX masternode and click button Get Config.
6) You must create a file named phantomx.conf. Paste the masternode config you copied before. Go to PhaNtomX folder and place it.
7) Select your PhaNtomX masternode and click button Start. Then restart the wallet.
It didnot work for me. Any idea where I made a mistake?
external address and port I took here: http://www.nirsoft.net/show_my_ip_address.php
unlock the wallet , unselect the staking only option and start the masternode.
I did it, the masternode started but nothing on status and active 00:00.
any idea?
thank you
I checked on console window and received this message: not capable masternode: Darksend Masternode List doesn't include our masternode, Shutting down masternode pinging service! CTxIn(COutPoint(0000000000, 4294967295), coinbase )
look like my masternode is not working.
1. Make sure you still have have 20,000 PNX in your MN address in ONE pile. In "Options" - "Display": enable Display Coin Control Display. Click Send - Inputs and expand your MN address to see 20,000: is it in a ONE pile?
2. Unlock wallet and from debug window type command: "masternode outputs". If you see some outputs - your collateral is good; if nothing output - you collateral is not valid.
3. Make sure your external IP is the same as in your phantomx.conf file; note if you have dynamic IP - it may change over a time.
4. Make sure you have specified valid IP and port, example: 100.99.98.97:31978 (31978 is the recommended port for PNX)
5. Every time you modify conf file - you need to restart wallet
6. Make sure to unlock your wallet before click Start masternode
7. After start, check in console: "masternode debug"
Good luck!
masternode debug and the answear is no problem were found.
thanks a lot Alex
