Hello all and Merry Christmas!
I'm new and making all the newbie mistakes. I have been trying to get my gekkscience 2pacs to work on this pool using the cgminer that was suggested. I have tried using this address, please let me know what I have done incorrectly, because all I see is "stratum from pool 0 requested restart", and New block found. It seems that there is no time for any shares to be accepted. This is also running on a Raspberry pi 3, if that helps.
./cgminer -o stratum+tcp://sha256.mine.zpool.ca:3333 -u my address -p c=mycoin,sha256 --suggest-diff 32 --gekko-2pac-freq 200
I have tried variations of c=mycoin,sha256,d=xxx or d_xxx.
If someone could tell me what I did wrong, that would be awesome, or if I'm using the incorrect program (the example is ccminer) and have been wracking my brain over this, please let me know.
Thank you.
Those sticks will find maybe 1 share a day due to their low hash rates, in the end you will burn more power than they earn.
Not sure where you are getting your information from regarding the GekkoScience 2PAC USB miners - those sticks can run all day and night at 18+GH/s with extreme efficiency! Based on your comment, I highly doubt you are familiar with those sticks because they will find shares in seconds when used correctly. My 2PAC sticks have paid for themselves tenfold by mining lower difficulty coins that have since become valuable.
@
kugr - I replied to your message regarding your issue, and you should have no problems if you make the few small changes I suggested. Let me know if you're still having trouble, but you should be all good now!

no currently the diff is broken for sha256 and scrypt..
as you can see, the diff is set to 32, yet its actually 32768.. which means i get about 1 share per hour.. maybe longer..
and my moonlanders.
same thing..