Post
Topic
Board Mining (Altcoins)
Re: Antminer D3 Blissz firmware (10/12 v1.12 update)
by
zerocom
on 26/12/2017, 21:08:51 UTC
Hello blissz i have upgrade your firmware and lost chain 3

my log kernel

Code:
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 65280
[    0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[    0.000000]   Normal zone: 512 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 64768 pages, LIFO batch:15
[    0.000000] AM335X ES1.0 (neon )
[    0.000000] PERCPU: Embedded 8 pages/cpu @c0933000 s9408 r8192 d15168 u32768
[    0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 64768
[    0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] allocated 524288 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 255MB = 255MB total
[    0.000000] Memory: 238676k/238676k available, 23468k reserved, 0K highmem
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xd0800000 - 0xff000000   ( 744 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd0000000   ( 256 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf800000 - 0xbfe00000   (   6 MB)
[    0.000000]       .text : 0xc0008000 - 0xc0612cf0   (6188 kB)
[    0.000000]       .init : 0xc0613000 - 0xc06554c0   ( 266 kB)
[    0.000000]       .data : 0xc0656000 - 0xc06cc020   ( 473 kB)
[    0.000000]        .bss : 0xc06cc020 - 0xc0725e3c   ( 360 kB)
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000353] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[    0.015437] pid_max: default: 32768 minimum: 301
[    0.015668] Security Framework initialized
[    0.015764] Mount-cache hash table entries: 512
[    0.024590] Initializing cgroup subsys cpuacct
[    0.024621] Initializing cgroup subsys memory
[    0.024684] Initializing cgroup subsys blkio
[    0.024818] CPU: Testing write buffer coherency: ok
[    0.025388] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.025462] Setting up static identity map for 0x8038c820 - 0x8038c86c
[    0.026791] Brought up 1 CPUs
[    0.026815] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[    0.028107] devtmpfs: initialized
[    0.092454] pinctrl core: initialized pinctrl subsystem
[    0.092668] rstctl core: initialized rstctl subsystem
[    0.093159] regulator-dummy: no parameters
[    0.093733] NET: Registered protocol family 16
[    0.094437] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.104118] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[    0.104303] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.105398] platform 49000000.edma: alias fck already exists
[    0.105431] platform 49000000.edma: alias fck already exists
[    0.105459] platform 49000000.edma: alias fck already exists
[    0.106612] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.106794] OMAP GPIO hardware version 0.1
[    0.108206] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.109530] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.110846] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.111476] of_get_named_gpio_flags exited with status 52
[    0.111508] gpio-rctrl rstctl.3: loaded OK
[    0.116606] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    0.119811] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.121998] cpsw.0: No hwaddr in dt. Using 3c:a3:08:20:34:7b from efuse
[    0.122032] cpsw.1: No hwaddr in dt. Using 3c:a3:08:20:34:7d from efuse
[    0.137576] bio: create slab at 0
[    0.149685] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.149926] of_get_named_gpio_flags: can't parse gpios property
[    0.150218] vmmcsd_fixed: 3300 mV
[    0.153330] SCSI subsystem initialized
[    0.153780] usbcore: registered new interface driver usbfs
[    0.153895] usbcore: registered new interface driver hub
[    0.154231] usbcore: registered new device driver usb
[    0.156339] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[    0.156373] omap_i2c 4819c000.i2c: unable to select pin group
[    0.156567] media: Linux media interface: v0.10
[    0.156664] Linux video capture interface: v2.00
[    0.156779] pps_core: LinuxPPS API ver. 1 registered
[    0.156795] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
[    0.157513] Advanced Linux Sound Architecture Driver Initialized.
[    0.158696] Switching to clocksource gp_timer
[    0.176705] NET: Registered protocol family 2
[    0.177694] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[    0.177783] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[    0.177873] TCP: Hash tables configured (established 2048 bind 2048)
[    0.177964] TCP: reno registered
[    0.177991] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    0.178037] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    0.178530] NET: Registered protocol family 1
[    0.179118] RPC: Registered named UNIX socket transport module.
[    0.179140] RPC: Registered udp transport module.
[    0.179153] RPC: Registered tcp transport module.
[    0.179167] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.179558] Trying to unpack rootfs image as initramfs...
[    1.941823] Freeing initrd memory: 12240K
[    1.942548] CPU PMU: probing PMU on CPU 0
[    1.942582] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[    1.943120] omap2_mbox_probe: platform not supported
[    1.947013] VFS: Disk quotas dquot_6.5.2
[    1.947250] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.948645] NFS: Registering the id_resolver key type
[    1.948737] Key type id_resolver registered
[    1.948754] Key type id_legacy registered
[    1.948820] jffs2: version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.
[    1.949256] msgmni has been set to 490
[    1.952133] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.952160] io scheduler noop registered
[    1.952176] io scheduler deadline registered
[    1.952232] io scheduler cfq registered (default)
[    1.956303] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.958714] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[    1.958997] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[    2.619797] console [ttyO0] enabled
[    2.624379] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[    2.633040] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[    2.641717] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[    2.650324] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[    2.659355] [drm] Initialized drm 1.1.0 20060810
[    2.678018] brd: module loaded
[    2.688319] loop: module loaded
[    2.692543] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[    2.702466] nand_get_flash_type: 2c,f1 against 2c,f1
[    2.707988] ONFI param page 0 valid
[    2.711661] ONFI flash detected
[    2.714980] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xf1 (Micron MT29F1G08ABAEAWP), 128MiB, page size: 2048, OOB size: 64
[    2.726891] omap2-nand: detected x8 NAND flash
[    2.731556] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    2.737139] omap2-nand: using custom ecc layout
[    2.741982] 10 ofpart partitions found on MTD device omap2-nand.0
[    2.748376] Creating 10 MTD partitions on "omap2-nand.0":
[    2.754054] 0x000000000000-0x000000020000 : "spl"
[    2.760874] 0x000000020000-0x000000040000 : "spl_backup1"
[    2.768343] 0x000000040000-0x000000060000 : "spl_backup2"
[    2.775732] 0x000000060000-0x000000080000 : "spl_backup3"
[    2.783143] 0x000000080000-0x000000240000 : "u-boot"
[    2.791354] 0x000000240000-0x000000260000 : "bootenv"
[    2.798323] 0x000000260000-0x000000280000 : "fdt"
[    2.804933] 0x000000280000-0x000000780000 : "kernel"
[    2.815951] 0x000000800000-0x000001c00000 : "root"
[    2.839418] 0x000001c00000-0x000003000000 : "config"
[    2.863161] OneNAND driver initializing
[    2.868901] usbcore: registered new interface driver asix
[    2.874719] usbcore: registered new interface driver cdc_ether
[    2.880964] usbcore: registered new interface driver smsc95xx
[    2.887083] usbcore: registered new interface driver net1080
[    2.893106] usbcore: registered new interface driver cdc_subset
[    2.899400] usbcore: registered new interface driver zaurus
[    2.905405] usbcore: registered new interface driver cdc_ncm
[    2.912147] usbcore: registered new interface driver cdc_acm
[    2.918107] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    2.926487] Initializing USB Mass Storage driver...
[    2.931728] usbcore: registered new interface driver usb-storage
[    2.938028] USB Mass Storage support registered.
[    2.943068] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[    2.949776] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[    2.955018] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.963790] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.963811] musb-hdrc: MHDRC RTL version 2.0
[    2.963826] musb-hdrc: setup fifo_mode 4
[    2.963854] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.964002] musb-hdrc musb-hdrc.0.auto: *** mode=3
[    2.969045] musb-hdrc musb-hdrc.0.auto: *** power=250
[    2.975058] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[    2.980309] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[    2.989079] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    2.989099] musb-hdrc: MHDRC RTL version 2.0
[    2.989114] musb-hdrc: setup fifo_mode 4
[    2.989135] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    2.989275] musb-hdrc musb-hdrc.1.auto: *** mode=1
[    2.994318] musb-hdrc musb-hdrc.1.auto: *** power=250
[    2.999626] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    3.006251] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[    3.014509] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[    3.014614] usb usb1: default language 0x0409
[    3.014672] usb usb1: udev 1, busnum 1, minor = 0
[    3.014696] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    3.021825] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    3.029397] usb usb1: Product: MUSB HDRC host driver
[    3.034612] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[    3.040280] usb usb1: SerialNumber: musb-hdrc.1.auto
[    3.046276] usb usb1: usb_probe_device
[    3.046304] usb usb1: configuration #1 chosen from 1 choice
[    3.046370] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[    3.046572] hub 1-0:1.0: usb_probe_interface
[    3.046593] hub 1-0:1.0: usb_probe_interface - got id
[    3.046621] hub 1-0:1.0: USB hub found
[    3.050625] hub 1-0:1.0: 1 port detected
[    3.054762] hub 1-0:1.0: standalone hub
[    3.054782] hub 1-0:1.0: individual port power switching
[    3.054800] hub 1-0:1.0: no over-current protection
[    3.054817] hub 1-0:1.0: Single TT
[    3.054838] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[    3.054857] hub 1-0:1.0: power on to power good time: 10ms
[    3.054913] hub 1-0:1.0: local power source is good
[    3.055026] hub 1-0:1.0: enabling power on all ports
[    3.056123] mousedev: PS/2 mouse device common for all mice
[    3.064100] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[    3.071593] 44e3e000.rtc: already running
[    3.076096] i2c /dev entries driver
[    3.081140] pps_ldisc: PPS line discipline registered
[    3.086640] Driver for 1-wire Dallas network protocol.
[    3.093888] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    3.101457] cpuidle: using governor ladder
[    3.105787] cpuidle: using governor menu
[    3.110390] of_get_named_gpio_flags exited with status 6
[    3.110409] of_get_named_gpio_flags: can't parse gpios property
[    3.110425] of_get_named_gpio_flags: can't parse gpios property
[    3.110462] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[    3.117685] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[    3.124498] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[    3.131716] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[    3.139040] mmc.4 supply vmmc_aux not found, using dummy regulator
[    3.145993] omap_hsmmc mmc.4: pins are not configured from the driver
[    3.155043] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[    3.180889] of_get_named_gpio_flags exited with status -517
[    3.180955] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.188740] ledtrig-cpu: registered to indicate activity on CPUs
[    3.195521] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[    3.202712] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    3.210874] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    3.217166] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[    3.224342] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[    3.236592] usbcore: registered new interface driver usbhid
[    3.242513] usbhid: USB HID core driver
[    3.249413] TCP: cubic registered
[    3.252937] Initializing XFRM netlink socket
[    3.257507] NET: Registered protocol family 17
[    3.262403] NET: Registered protocol family 15
[    3.267252] Key type dns_resolver registered
[    3.271884] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    3.279962] ThumbEE CPU extension supported.
[    3.284474] Registering SWP/SWPB emulation handler
[    3.290488] registered taskstats version 1
[    3.297110] of_get_named_gpio_flags exited with status -517
[    3.297181] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.354169] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    3.360619] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[    3.375150] libphy: 4a101000.mdio: probed
[    3.379505] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[    3.389728] Detected MACID = 3c:a3:08:20:34:7b
[    3.394416] cpsw 4a100000.ethernet: NAPI disabled
[    3.399807] of_get_named_gpio_flags exited with status -517
[    3.399873] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[    3.408597] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    3.417879] cpu0 supply cpu0 not found, using dummy regulator
[    3.424368] cpufreq_cpu0: failed to scale voltage up: -22
[    3.430187] cpufreq_cpu0: failed to scale voltage up: -22
[    3.442948] ALSA device list:
[    3.446183]   No soundcards found.
[    3.450739] Freeing init memory: 264K
[    3.454795] Failed to execute /init
[    4.482229] jffs2: notice: (122) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[    5.769263] net eth0: initializing cpsw version 1.12 (0)
[    5.778264] net eth0: phy found : id is : 0x7c0f1
[    5.783657] libphy: PHY 4a101000.mdio:01 not found
[    5.788853] net eth0: phy 4a101000.mdio:01 not found on slave 1
[    8.856601] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Dec 26 21:04:05 (none) local0.err cgminer: Miner compile time: Mon Nov 20 17:06:56 CST 2017 type: Antminer D3
Dec 26 21:04:05 (none) local0.warn cgminer: Started cgminer 4.9.0
Dec 26 21:04:05 (none) local0.warn cgminer[375]: bitmain_DASH_init
Dec 26 21:04:06 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:06 (none) local0.err cgminer[375]: FAN2 too slow ...
Dec 26 21:04:06 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:06 (none) local0.err cgminer[375]: FAN2 too slow ...
Dec 26 21:04:07 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:07 (none) local0.err cgminer[375]: FAN2 too slow ...
Dec 26 21:04:07 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:07 (none) local0.err cgminer[375]: FAN2 too slow ...
Dec 26 21:04:08 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:08 (none) local0.err cgminer[375]: FAN2 too slow ...
Dec 26 21:04:08 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:09 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:09 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:10 (none) local0.err cgminer[375]: FAN1 too slow ...
Dec 26 21:04:10 (none) local0.warn cgminer[375]: check_fan_speed OK
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio51/value  chain 0
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio48/value  chain 1
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detected at /sys/class/gpio/gpio47/value  chain 2
Dec 26 21:04:10 (none) local0.notice cgminer[375]: detect total chain num 3
Dec 26 21:04:10 (none) local0.notice cgminer[375]: i2c init ok
Dec 26 21:04:10 (none) local0.notice cgminer[375]: check_whether_need_update_pic_program
Dec 26 21:04:11 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Dec 26 21:04:12 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 26 21:04:12 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 26 21:04:14 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Dec 26 21:04:14 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 26 21:04:15 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 26 21:04:16 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Dec 26 21:04:16 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 26 21:04:17 (none) local0.notice cgminer[375]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 26 21:04:17 (none) local0.notice cgminer[375]: every_chain_reset_PIC16F1704_pic_new
Dec 26 21:04:18 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Dec 26 21:04:19 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Dec 26 21:04:20 (none) local0.notice cgminer[375]: reset_PIC16F1704_pic_new ok
Dec 26 21:04:21 (none) local0.notice cgminer[375]: every_chain_jump_from_loader_to_app_PIC16F1704_new
Dec 26 21:04:21 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 26 21:04:22 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 26 21:04:22 (none) local0.notice cgminer[375]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 26 21:04:23 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Dec 26 21:04:23 (none) local0.notice cgminer[375]: pic_heart_beat_func_new
Dec 26 21:04:23 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:23 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:23 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:24 (none) local0.notice cgminer[375]: reset_all_hash_board
Dec 26 21:04:25 (none) local0.notice cgminer[375]: tty_init
Dec 26 21:04:25 (none) local0.notice cgminer[375]: tty_init_chain
Dec 26 21:04:25 (none) local0.notice cgminer[375]: tty_init_chain chainid = 0
Dec 26 21:04:25 (none) local0.err cgminer[375]: create rx read thread for chain 0 ok
Dec 26 21:04:25 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[0]
Dec 26 21:04:25 (none) local0.err cgminer[375]: create tx read thread for chain 0 ok
Dec 26 21:04:25 (none) local0.notice cgminer[375]: open device over
Dec 26 21:04:25 (none) local0.notice cgminer[375]: tty_init_chain
Dec 26 21:04:25 (none) local0.notice cgminer[375]: tty_init_chain chainid = 1
Dec 26 21:04:25 (none) local0.err cgminer[375]: create rx read thread for chain 1 ok
Dec 26 21:04:25 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[1]
Dec 26 21:04:25 (none) local0.err cgminer[375]: create tx read thread for chain 1 ok
Dec 26 21:04:25 (none) local0.notice cgminer[375]: open device over
Dec 26 21:04:25 (none) local0.notice cgminer[375]: tty_init_chain
Dec 26 21:04:25 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Dec 26 21:04:25 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Dec 26 21:04:25 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Dec 26 21:04:26 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Dec 26 21:04:26 (none) local0.notice cgminer[375]: open device over
Dec 26 21:04:26 (none) local0.notice cgminer[375]: tty_init_chain
Dec 26 21:04:26 (none) local0.notice cgminer[375]: open device over
Dec 26 21:04:26 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Dec 26 21:04:26 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 60 ASICs
Dec 26 21:04:26 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Dec 26 21:04:27 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 0 ASICs
Dec 26 21:04:27 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new
Dec 26 21:04:29 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Dec 26 21:04:29 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:29 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:30 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:30 (none) local0.notice cgminer[375]: reset_all_hash_board
Dec 26 21:04:31 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Dec 26 21:04:31 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 60 ASICs
Dec 26 21:04:32 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Dec 26 21:04:32 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 0 ASICs
Dec 26 21:04:32 (none) local0.notice cgminer[375]: recheck_asic_num DONE!
Dec 26 21:04:32 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new
Dec 26 21:04:34 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Dec 26 21:04:34 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:34 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:34 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:35 (none) local0.notice cgminer[375]: reset_all_hash_board
Dec 26 21:04:36 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Dec 26 21:04:36 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 60 ASICs
Dec 26 21:04:37 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Dec 26 21:04:37 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 0 ASICs
Dec 26 21:04:37 (none) local0.notice cgminer[375]: recheck_asic_num DONE!
Dec 26 21:04:37 (none) local0.notice cgminer[375]: every_chain_disable_PIC16F1704_dc_dc_new
Dec 26 21:04:39 (none) local0.notice cgminer[375]: every_chain_enable_PIC16F1704_dc_dc_new
Dec 26 21:04:39 (none) local0.err cgminer[375]: bitmain_scanreg: reg_value = 0x176000f5 crc5 error,should be 0d,but check as 0f
Dec 26 21:04:39 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:39 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:39 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:04:40 (none) local0.notice cgminer[375]: reset_all_hash_board
Dec 26 21:04:41 (none) local0.notice cgminer[375]: check_every_chain_asic_number
Dec 26 21:04:41 (none) local0.warn cgminer[375]: check_asic_reg: Chain0 has 60 ASICs
Dec 26 21:04:41 (none) local0.warn cgminer[375]: check_asic_reg: Chain1 has 60 ASICs
Dec 26 21:04:42 (none) local0.warn cgminer[375]: check_asic_reg: Chain2 has 0 ASICs
Dec 26 21:04:42 (none) local0.notice cgminer[375]: recheck_asic_num DONE!
Dec 26 21:04:42 (none) local0.notice cgminer[375]: calculate_address_interval: temp_asic_number = 64, addrInterval = 1
Dec 26 21:04:42 (none) local0.notice cgminer[375]: calculate_address_interval: CHIP_OFFSET = 0x04000000, CORE_OFFSET = 0x00800000
Dec 26 21:04:42 (none) local0.notice cgminer[375]: set_ticket_mask ticket_mask = 0x0000001b
Dec 26 21:04:42 (none) local0.notice cgminer[375]: every_chain_get_PIC16F1704_freq_new
Dec 26 21:04:44 (none) local0.notice cgminer[375]: set_frequency: frequency = 537
Dec 26 21:04:44 (none) local0.notice cgminer[375]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 1
Dec 26 21:04:44 (none) local0.notice cgminer[375]: Now Set [0] Chain Address
Dec 26 21:04:45 (none) local0.notice cgminer[375]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 1
Dec 26 21:04:45 (none) local0.notice cgminer[375]: Now Set [1] Chain Address
Dec 26 21:04:46 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 0 ASIC, and addrInterval is 1
Dec 26 21:04:46 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Dec 26 21:04:47 (none) local0.notice cgminer[375]: software_set_address_chain: chain 3 has 0 ASIC, and addrInterval is 1
Dec 26 21:04:47 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 26 21:04:47 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 26 21:04:47 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 26 21:04:47 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 26 21:04:47 (none) local0.notice cgminer[375]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 26 21:04:47 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 26 21:04:47 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 26 21:04:47 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 26 21:04:47 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 26 21:04:47 (none) local0.notice cgminer[375]: 0 calibration_sensor_offset_chain
Dec 26 21:04:47 (none) local0.notice cgminer[375]: chain:0 local:20 remote:23
Dec 26 21:04:47 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 26 21:04:47 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -3,
Dec 26 21:04:48 (none) local0.notice cgminer[375]: chain:0 local:19 remote:20
Dec 26 21:04:48 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 26 21:04:48 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -4,
Dec 26 21:04:48 (none) local0.notice cgminer[375]: 1 calibration_sensor_offset_chain
Dec 26 21:04:48 (none) local0.notice cgminer[375]: chain:1 local:19 remote:22
Dec 26 21:04:48 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Dec 26 21:04:49 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -3,
Dec 26 21:04:49 (none) local0.notice cgminer[375]: chain:1 local:19 remote:19
Dec 26 21:04:49 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Dec 26 21:04:49 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -3,
Dec 26 21:04:49 (none) local0.notice cgminer[375]: 2 calibration_sensor_offset_chain
Dec 26 21:04:50 (none) local0.notice cgminer[375]: chain:2 local:0 remote:0
Dec 26 21:04:50 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Dec 26 21:04:51 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : 00,
Dec 26 21:04:51 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain
Dec 26 21:04:51 (none) local0.warn cgminer[375]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 26 21:04:51 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -4,
Dec 26 21:04:51 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain
Dec 26 21:04:51 (none) local0.warn cgminer[375]: Chain 1 set_temperature_offset_value_chain_sensor
Dec 26 21:04:51 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -3,
Dec 26 21:04:51 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Dec 26 21:04:51 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Dec 26 21:04:52 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : 00,
Dec 26 21:04:52 (none) local0.notice cgminer[375]: frequency = '537'
Dec 26 21:04:52 (none) local0.notice cgminer[375]: dev.timeout = 562356 us
Dec 26 21:04:52 (none) local0.notice cgminer[375]: open_core_chain
Dec 26 21:04:52 (none) local0.notice cgminer[375]: open_core_chain
Dec 26 21:04:52 (none) local0.notice cgminer[375]: open_core_chain
Dec 26 21:04:52 (none) local0.notice cgminer[375]: open_core_chain
Dec 26 21:04:55 (none) local0.err cgminer[375]: cgminer time error total_secs = 1514322295.954758 last_total_secs = 1.000000
Dec 26 21:05:02 (none) local0.warn cgminer[375]: Pool 0 stratum+tcp://stratum-dash.antpool.com:6099 alive, testing stability
Dec 26 21:05:02 (none) local0.warn cgminer[375]: Switching to pool 0 stratum+tcp://stratum-dash.antpool.com:6099
Dec 26 21:05:02 (none) local0.warn cgminer[375]: API running in IP access mode on port 4028 (15)
Dec 26 21:06:56 (none) local0.notice cgminer[375]: chain 2 reinit 0.00
Dec 26 21:06:57 (none) local0.notice cgminer[375]: enable_PIC16F1704_dc_dc_new ok
Dec 26 21:06:59 (none) local0.notice cgminer[375]: tty_init_chain
Dec 26 21:06:59 (none) local0.notice cgminer[375]: tty_init_chain chainid = 2
Dec 26 21:06:59 (none) local0.err cgminer[375]: create rx read thread for chain 2 ok
Dec 26 21:06:59 (none) local0.notice cgminer[375]: Start A New Asic Response.Chain Id:[2]
Dec 26 21:06:59 (none) local0.err cgminer[375]: create tx read thread for chain 2 ok
Dec 26 21:06:59 (none) local0.notice cgminer[375]: open device over
Dec 26 21:06:59 (none) local0.notice cgminer[375]: software_set_address_chain: chain 2 has 0 ASIC, and addrInterval is 1
Dec 26 21:06:59 (none) local0.notice cgminer[375]: Now Set [2] Chain Address
Dec 26 21:07:00 (none) local0.notice cgminer[375]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 26 21:07:00 (none) local0.notice cgminer[375]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 26 21:07:00 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain
Dec 26 21:07:00 (none) local0.warn cgminer[375]: Chain 2 set_temperature_offset_value_chain_sensor
Dec 26 21:07:01 (none) local0.notice cgminer[375]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : 00,
Dec 26 21:07:01 (none) local0.notice cgminer[375]: open_core_chain

please fix my problem