How many GPU are you connect to the same power supply? most of the time crashes are from power issue, a lot of time you system works fine suddenly start crashing due to the power supply Quality degrade, and become less efficient, also most of the time claymore undervolt command does not work with some drivers version, these cause computer to crash in claymore you have command to help you out with bad power supply.
i recommend the following to troubleshoot.
add this command -di 0 so it run with gpu 0 if all work fine go to -di 01 then it will enable 2 cards after use -di 012 etc..., until you find the problematic cards, then you can identify if its card issue of psu issue.
good luck.
Hello guys, I have a big question about this miner.
Every time I use it my rig crash, seems to me that something might be wrong with my settings.
With details, what happens is the following:
When the miner starts, and start to set the DAG epoch, specifically on the part that shows "Creating GPU buffer for GPUX", that's a very likely point for my rig to crash, it might crash, or it might not, is more like luck, if the computer freezes, then I manually restart it, if not I just let it mine, however, I will crash at some point, maybe in one hour (with is pretty annoying because I will have to restart it multiple times in order to pass the setting dag epoch without crashing), or maybe it will last more, sometimes it last even two days, but it will crash without a doubt.
What can be wrong?, I have used the CryptoNight Claymore miner, and is a lot more stable, I remember I mined monero with it for 7 days in a row without any problem (with a 100% chance to pass the set of the dag), and also I have used SGMiner without any crash problem too.
My cards are 6x Asus RX 470 4Gb, I don't think is a PSU problem because as I said, it works perfectly when using another miner, but my PSU is a 1200w corsair HX 1200i.
Also, my system is using 24gb of virtual memory and have 4gb of RAM.
Any help will be appreciated.