Hey Everyone!
Big thanks to blissz!!!
I have been lurking the last couple of weeks and finally took the plunge this weekend to upgrade my d3's this weekend with the v2.04 beta :: 22/12 :: test version - both machines seemed to be running great. And sometime over the course of the night I could hear what sounded like the d3's power cycling every couple of minutes... after checking on the machines I see on the miner status page that everything is blank? I have reset, reflashed stock firmware & reset, etc... Each time i get the same result - nothing in miner status page and I cant see the miners connecting to any pools.
What went wrong & What should I being doing next to get them running again?
screen capture of miner status page
https://ibb.co/cLSG1bcopy of log
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.8.13 (xxl@armdev01) (gcc version 4.7.4 20130626 (prerelease) (Linaro GCC 4.7-2013.07) ) #22 SMP Tue Dec 2 15:26:11 CST 2014
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=50c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: TI AM335x BeagleBone
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 65280
[ 0.000000] free_area_init_node: node 0, pgdat c06cb100, node_mem_map c0726000
[ 0.000000] Normal zone: 512 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 64768 pages, LIFO batch:15
[ 0.000000] AM335X ES1.0 (neon )
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c0933000 s9408 r8192 d15168 u32768
[ 0.000000] pcpu-alloc: s9408 r8192 d15168 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc:
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 64768
[ 0.000000] Kernel command line: console=ttyO0,115200n8 init=/sbin/init
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] allocated 524288 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Memory: 255MB = 255MB total
[ 0.000000] Memory: 238676k/238676k available, 23468k reserved, 0K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff000000 ( 744 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0612cf0 (6188 kB)
[ 0.000000] .init : 0xc0613000 - 0xc06554c0 ( 266 kB)
[ 0.000000] .data : 0xc0656000 - 0xc06cc020 ( 473 kB)
[ 0.000000] .bss : 0xc06cc020 - 0xc0725e3c ( 360 kB)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=1.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[ 0.000000] Total of 128 interrupts on 1 active controller
[ 0.000000] OMAP clockevent source: GPTIMER1 at 24000000 Hz
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[ 0.000000] OMAP clocksource: GPTIMER2 at 24000000 Hz
[ 0.000000] Console: colour dummy device 80x30
[ 0.000352] Calibrating delay loop... 545.07 BogoMIPS (lpj=531968)
[ 0.015436] pid_max: default: 32768 minimum: 301
[ 0.015665] Security Framework initialized
[ 0.015759] Mount-cache hash table entries: 512
[ 0.024584] Initializing cgroup subsys cpuacct
[ 0.024617] Initializing cgroup subsys memory
[ 0.024680] Initializing cgroup subsys blkio
[ 0.024815] CPU: Testing write buffer coherency: ok
[ 0.025390] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[ 0.025464] Setting up static identity map for 0x8038c820 - 0x8038c86c
[ 0.026795] Brought up 1 CPUs
[ 0.026819] SMP: Total of 1 processors activated (545.07 BogoMIPS).
[ 0.028115] devtmpfs: initialized
[ 0.092524] pinctrl core: initialized pinctrl subsystem
[ 0.092741] rstctl core: initialized rstctl subsystem
[ 0.093235] regulator-dummy: no parameters
[ 0.093802] NET: Registered protocol family 16
[ 0.094509] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.104167] pinctrl-single 44e10800.pinmux: prop pinctrl-0 index 0 invalid phandle
[ 0.104346] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[ 0.105435] platform 49000000.edma: alias fck already exists
[ 0.105469] platform 49000000.edma: alias fck already exists
[ 0.105497] platform 49000000.edma: alias fck already exists
[ 0.106646] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[ 0.106829] OMAP GPIO hardware version 0.1
[ 0.108233] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[ 0.109555] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[ 0.110876] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[ 0.111508] of_get_named_gpio_flags exited with status 52
[ 0.111540] gpio-rctrl rstctl.3: loaded OK
[ 0.116644] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[ 0.119851] hw-breakpoint: debug architecture 0x4 unsupported.
[ 0.122039] cpsw.0: No hwaddr in dt. Using 3c:a3:08:25:29:ab from efuse
[ 0.122070] cpsw.1: No hwaddr in dt. Using 3c:a3:08:25:29:ad from efuse
[ 0.137625] bio: create slab at 0
[ 0.149761] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[ 0.150000] of_get_named_gpio_flags: can't parse gpios property
[ 0.150299] vmmcsd_fixed: 3300 mV
[ 0.153414] SCSI subsystem initialized
[ 0.153871] usbcore: registered new interface driver usbfs
[ 0.153984] usbcore: registered new interface driver hub
[ 0.154315] usbcore: registered new device driver usb
[ 0.156420] omap_i2c 4819c000.i2c: bus 0 rev0.11 at 100 kHz
[ 0.156454] omap_i2c 4819c000.i2c: unable to select pin group
[ 0.156649] media: Linux media interface: v0.10
[ 0.156747] Linux video capture interface: v2.00
[ 0.156863] pps_core: LinuxPPS API ver. 1 registered
[ 0.156879] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <
giometti@linux.it>
[ 0.157597] Advanced Linux Sound Architecture Driver Initialized.
[ 0.158795] Switching to clocksource gp_timer
[ 0.176796] NET: Registered protocol family 2
[ 0.177787] TCP established hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.177874] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[ 0.177963] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.178056] TCP: reno registered
[ 0.178083] UDP hash table entries: 256 (order: 1, 12288 bytes)
[ 0.178128] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[ 0.178616] NET: Registered protocol family 1
[ 0.179194] RPC: Registered named UNIX socket transport module.
[ 0.179215] RPC: Registered udp transport module.
[ 0.179228] RPC: Registered tcp transport module.
[ 0.179242] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.179623] Trying to unpack rootfs image as initramfs...
[ 1.942169] Freeing initrd memory: 12240K
[ 1.942851] CPU PMU: probing PMU on CPU 0
[ 1.942885] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
[ 1.943427] omap2_mbox_probe: platform not supported
[ 1.947318] VFS: Disk quotas dquot_6.5.2
[ 1.947554] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.948961] NFS: Registering the id_resolver key type
[ 1.949077] Key type id_resolver registered
[ 1.949094] Key type id_legacy registered
[ 1.949160] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 1.949594] msgmni has been set to 490
[ 1.952485] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.952511] io scheduler noop registered
[ 1.952527] io scheduler deadline registered
[ 1.952584] io scheduler cfq registered (default)
[ 1.956658] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.959082] omap_uart 44e09000.serial: did not get pins for uart0 error: -19
[ 1.959365] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88) is a OMAP UART0
[ 2.620135] console [ttyO0] enabled
[ 2.624669] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89) is a OMAP UART1
[ 2.633322] 48024000.serial: ttyO2 at MMIO 0x48024000 (irq = 90) is a OMAP UART2
[ 2.642007] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61) is a OMAP UART4
[ 2.650622] 481aa000.serial: ttyO5 at MMIO 0x481aa000 (irq = 62) is a OMAP UART5
[ 2.659646] [drm] Initialized drm 1.1.0 20060810
[ 2.678293] brd: module loaded
[ 2.688593] loop: module loaded
[ 2.692811] bone-capemgr bone_capemgr.8: Failed to find baseboard eeprom node
[ 2.702758] nand_get_flash_type: 2c,f1 against 2c,f1
[ 2.708284] ONFI param page 0 valid
[ 2.711957] ONFI flash detected
[ 2.715276] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xf1 (Micron MT29F1G08ABAEAWP), 128MiB, page size: 2048, OOB size: 64
[ 2.727186] omap2-nand: detected x8 NAND flash
[ 2.731851] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[ 2.737432] omap2-nand: using custom ecc layout
[ 2.742273] 10 ofpart partitions found on MTD device omap2-nand.0
[ 2.748668] Creating 10 MTD partitions on "omap2-nand.0":
[ 2.754346] 0x000000000000-0x000000020000 : "spl"
[ 2.761162] 0x000000020000-0x000000040000 : "spl_backup1"
[ 2.768622] 0x000000040000-0x000000060000 : "spl_backup2"
[ 2.775978] 0x000000060000-0x000000080000 : "spl_backup3"
[ 2.783385] 0x000000080000-0x000000240000 : "u-boot"
[ 2.791592] 0x000000240000-0x000000260000 : "bootenv"
[ 2.798559] 0x000000260000-0x000000280000 : "fdt"
[ 2.805149] 0x000000280000-0x000000780000 : "kernel"
[ 2.816163] 0x000000800000-0x000001c00000 : "root"
[ 2.839632] 0x000001c00000-0x000003000000 : "config"
[ 2.863377] OneNAND driver initializing
[ 2.869104] usbcore: registered new interface driver asix
[ 2.874920] usbcore: registered new interface driver cdc_ether
[ 2.881167] usbcore: registered new interface driver smsc95xx
[ 2.887289] usbcore: registered new interface driver net1080
[ 2.893339] usbcore: registered new interface driver cdc_subset
[ 2.899633] usbcore: registered new interface driver zaurus
[ 2.905640] usbcore: registered new interface driver cdc_ncm
[ 2.912371] usbcore: registered new interface driver cdc_acm
[ 2.918331] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 2.926710] Initializing USB Mass Storage driver...
[ 2.931950] usbcore: registered new interface driver usb-storage
[ 2.938249] USB Mass Storage support registered.
[ 2.943288] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host)
[ 2.950035] musb-hdrc musb-hdrc.0.auto: pdev->id = 0
[ 2.955269] musb-hdrc musb-hdrc.0.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 2.964039] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 2.964062] musb-hdrc: MHDRC RTL version 2.0
[ 2.964077] musb-hdrc: setup fifo_mode 4
[ 2.964105] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 2.964251] musb-hdrc musb-hdrc.0.auto: *** mode=3
[ 2.969294] musb-hdrc musb-hdrc.0.auto: *** power=250
[ 2.975349] musb-hdrc musb-hdrc.1.auto: pdev->id = 1
[ 2.980587] musb-hdrc musb-hdrc.1.auto: drivers/usb/musb/musb_dsps.c:468 dsps_musb_init: OK
[ 2.989355] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[ 2.989374] musb-hdrc: MHDRC RTL version 2.0
[ 2.989388] musb-hdrc: setup fifo_mode 4
[ 2.989411] musb-hdrc: 28/31 max ep, 16384/16384 memory
[ 2.989551] musb-hdrc musb-hdrc.1.auto: *** mode=1
[ 2.994593] musb-hdrc musb-hdrc.1.auto: *** power=250
[ 2.999901] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[ 3.006584] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 1
[ 3.014824] musb-hdrc musb-hdrc.1.auto: supports USB remote wakeup
[ 3.014929] usb usb1: default language 0x0409
[ 3.014987] usb usb1: udev 1, busnum 1, minor = 0
[ 3.015011] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 3.022137] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.029709] usb usb1: Product: MUSB HDRC host driver
[ 3.034923] usb usb1: Manufacturer: Linux 3.8.13 musb-hcd
[ 3.040590] usb usb1: SerialNumber: musb-hdrc.1.auto
[ 3.046567] usb usb1: usb_probe_device
[ 3.046595] usb usb1: configuration #1 chosen from 1 choice
[ 3.046660] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 3.046861] hub 1-0:1.0: usb_probe_interface
[ 3.046883] hub 1-0:1.0: usb_probe_interface - got id
[ 3.046910] hub 1-0:1.0: USB hub found
[ 3.050916] hub 1-0:1.0: 1 port detected
[ 3.055056] hub 1-0:1.0: standalone hub
[ 3.055076] hub 1-0:1.0: individual port power switching
[ 3.055094] hub 1-0:1.0: no over-current protection
[ 3.055111] hub 1-0:1.0: Single TT
[ 3.055132] hub 1-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 3.055152] hub 1-0:1.0: power on to power good time: 10ms
[ 3.055208] hub 1-0:1.0: local power source is good
[ 3.055324] hub 1-0:1.0: enabling power on all ports
[ 3.056413] mousedev: PS/2 mouse device common for all mice
[ 3.064384] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
[ 3.072151] i2c /dev entries driver
[ 3.077198] pps_ldisc: PPS line discipline registered
[ 3.082665] Driver for 1-wire Dallas network protocol.
[ 3.089953] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[ 3.097518] cpuidle: using governor ladder
[ 3.101844] cpuidle: using governor menu
[ 3.106449] of_get_named_gpio_flags exited with status 6
[ 3.106468] of_get_named_gpio_flags: can't parse gpios property
[ 3.106484] of_get_named_gpio_flags: can't parse gpios property
[ 3.106521] omap_hsmmc mmc.4: of_parse_phandle_with_args of 'reset' failed
[ 3.113752] omap_hsmmc mmc.4: Failed to get rstctl; not using any
[ 3.120563] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[ 3.127780] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[ 3.135096] mmc.4 supply vmmc_aux not found, using dummy regulator
[ 3.142057] omap_hsmmc mmc.4: pins are not configured from the driver
[ 3.157051] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
[ 3.177076] of_get_named_gpio_flags exited with status -517
[ 3.177141] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.184917] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.191705] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[ 3.198898] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[ 3.207003] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[ 3.213353] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[ 3.220536] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[ 3.232797] usbcore: registered new interface driver usbhid
[ 3.238719] usbhid: USB HID core driver
[ 3.245615] TCP: cubic registered
[ 3.249140] Initializing XFRM netlink socket
[ 3.253707] NET: Registered protocol family 17
[ 3.258581] NET: Registered protocol family 15
[ 3.263451] Key type dns_resolver registered
[ 3.268085] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[ 3.276165] ThumbEE CPU extension supported.
[ 3.280675] Registering SWP/SWPB emulation handler
[ 3.286691] registered taskstats version 1
[ 3.293317] of_get_named_gpio_flags exited with status -517
[ 3.293390] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.350359] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[ 3.356771] davinci_mdio 4a101000.mdio: detected phy mask fffffffe
[ 3.371330] libphy: 4a101000.mdio: probed
[ 3.375645] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver SMSC LAN8710/LAN8720
[ 3.385880] Detected MACID = 3c:a3:08:25:29:ab
[ 3.390560] cpsw 4a100000.ethernet: NAPI disabled
[ 3.395951] of_get_named_gpio_flags exited with status -517
[ 3.396016] platform gpio-leds.7: Driver leds-gpio requests probe deferral
[ 3.404726] omap_rtc 44e3e000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[ 3.414009] cpu0 supply cpu0 not found, using dummy regulator
[ 3.420491] cpufreq_cpu0: failed to scale voltage up: -22
[ 3.426307] cpufreq_cpu0: failed to scale voltage up: -22
[ 3.439070] ALSA device list:
[ 3.442303] No soundcards found.
[ 3.446875] Freeing init memory: 264K
[ 3.450924] Failed to execute /init
[ 4.452923] jffs2: notice: (122) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
[ 5.746861] net eth0: initializing cpsw version 1.12 (0)
[ 5.755777] net eth0: phy found : id is : 0x7c0f1
[ 5.761202] libphy: PHY 4a101000.mdio:01 not found
[ 5.766404] net eth0: phy 4a101000.mdio:01 not found on slave 1
[ 9.903560] libphy: 4a101000.mdio:00 - Link is Up - 100/Full
Dec 28 02:12:09 (none) local0.err cgminer: Miner compile time: Mon Nov 20 17:06:56 CST 2017 type: Antminer D3
Dec 28 02:12:09 (none) local0.warn cgminer: Started cgminer 4.9.0
Dec 28 02:12:09 (none) local0.warn cgminer[376]: bitmain_DASH_init
Dec 28 02:12:10 (none) local0.err cgminer[376]: FAN1 too slow ...
Dec 28 02:12:10 (none) local0.err cgminer[376]: FAN2 too slow ...
Dec 28 02:12:10 (none) local0.err cgminer[376]: FAN1 too slow ...
Dec 28 02:12:10 (none) local0.err cgminer[376]: FAN2 too slow ...
Dec 28 02:12:11 (none) local0.err cgminer[376]: FAN1 too slow ...
Dec 28 02:12:11 (none) local0.err cgminer[376]: FAN1 too slow ...
Dec 28 02:12:12 (none) local0.err cgminer[376]: FAN1 too slow ...
Dec 28 02:12:12 (none) local0.err cgminer[376]: FAN1 too slow ...
Dec 28 02:12:13 (none) local0.err cgminer[376]: FAN1 too slow ...
Dec 28 02:12:13 (none) local0.err cgminer[376]: FAN1 too slow ...
Dec 28 02:12:14 (none) local0.err cgminer[376]: FAN1 too slow ...
Dec 28 02:12:14 (none) local0.warn cgminer[376]: check_fan_speed OK
Dec 28 02:12:14 (none) local0.notice cgminer[376]: detected at /sys/class/gpio/gpio51/value chain 0
Dec 28 02:12:14 (none) local0.notice cgminer[376]: detected at /sys/class/gpio/gpio48/value chain 1
Dec 28 02:12:14 (none) local0.notice cgminer[376]: detected at /sys/class/gpio/gpio47/value chain 2
Dec 28 02:12:14 (none) local0.notice cgminer[376]: detect total chain num 3
Dec 28 02:12:14 (none) local0.notice cgminer[376]: i2c init ok
Dec 28 02:12:14 (none) local0.notice cgminer[376]: check_whether_need_update_pic_program
Dec 28 02:12:15 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
Dec 28 02:12:16 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 28 02:12:16 (none) local0.notice cgminer[376]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 28 02:12:17 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
Dec 28 02:12:18 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 28 02:12:18 (none) local0.notice cgminer[376]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 28 02:12:19 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
Dec 28 02:12:20 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 28 02:12:20 (none) local0.notice cgminer[376]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 28 02:12:20 (none) local0.notice cgminer[376]: every_chain_reset_PIC16F1704_pic_new
Dec 28 02:12:22 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
Dec 28 02:12:23 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
Dec 28 02:12:24 (none) local0.notice cgminer[376]: reset_PIC16F1704_pic_new ok
Dec 28 02:12:25 (none) local0.notice cgminer[376]: every_chain_jump_from_loader_to_app_PIC16F1704_new
Dec 28 02:12:25 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 28 02:12:25 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 28 02:12:26 (none) local0.notice cgminer[376]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 28 02:12:27 (none) local0.notice cgminer[376]: every_chain_enable_PIC16F1704_dc_dc_new
Dec 28 02:12:27 (none) local0.notice cgminer[376]: pic_heart_beat_func_new
Dec 28 02:12:27 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
Dec 28 02:12:27 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
Dec 28 02:12:27 (none) local0.notice cgminer[376]: enable_PIC16F1704_dc_dc_new ok
Dec 28 02:12:28 (none) local0.notice cgminer[376]: reset_all_hash_board
Dec 28 02:12:29 (none) local0.notice cgminer[376]: tty_init
Dec 28 02:12:29 (none) local0.notice cgminer[376]: tty_init_chain
Dec 28 02:12:29 (none) local0.notice cgminer[376]: tty_init_chain chainid = 0
Dec 28 02:12:29 (none) local0.err cgminer[376]: create rx read thread for chain 0 ok
Dec 28 02:12:29 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[0]
Dec 28 02:12:29 (none) local0.err cgminer[376]: create tx read thread for chain 0 ok
Dec 28 02:12:29 (none) local0.notice cgminer[376]: open device over
Dec 28 02:12:29 (none) local0.notice cgminer[376]: tty_init_chain
Dec 28 02:12:29 (none) local0.notice cgminer[376]: tty_init_chain chainid = 1
Dec 28 02:12:29 (none) local0.err cgminer[376]: create rx read thread for chain 1 ok
Dec 28 02:12:29 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[1]
Dec 28 02:12:29 (none) local0.err cgminer[376]: create tx read thread for chain 1 ok
Dec 28 02:12:29 (none) local0.notice cgminer[376]: open device over
Dec 28 02:12:29 (none) local0.notice cgminer[376]: tty_init_chain
Dec 28 02:12:29 (none) local0.notice cgminer[376]: tty_init_chain chainid = 2
Dec 28 02:12:29 (none) local0.err cgminer[376]: create rx read thread for chain 2 ok
Dec 28 02:12:29 (none) local0.notice cgminer[376]: Start A New Asic Response.Chain Id:[2]
Dec 28 02:12:29 (none) local0.err cgminer[376]: create tx read thread for chain 2 ok
Dec 28 02:12:29 (none) local0.notice cgminer[376]: open device over
Dec 28 02:12:29 (none) local0.notice cgminer[376]: tty_init_chain
Dec 28 02:12:29 (none) local0.notice cgminer[376]: open device over
Dec 28 02:12:30 (none) local0.notice cgminer[376]: check_every_chain_asic_number
Dec 28 02:12:30 (none) local0.warn cgminer[376]: check_asic_reg: Chain0 has 60 ASICs
Dec 28 02:12:30 (none) local0.warn cgminer[376]: check_asic_reg: Chain1 has 60 ASICs
Dec 28 02:12:31 (none) local0.warn cgminer[376]: check_asic_reg: Chain2 has 60 ASICs
Dec 28 02:12:31 (none) local0.notice cgminer[376]: calculate_address_interval: temp_asic_number = 64, addrInterval = 1
Dec 28 02:12:31 (none) local0.notice cgminer[376]: calculate_address_interval: CHIP_OFFSET = 0x04000000, CORE_OFFSET = 0x00800000
Dec 28 02:12:31 (none) local0.notice cgminer[376]: set_ticket_mask ticket_mask = 0x0000001b
Dec 28 02:12:31 (none) local0.notice cgminer[376]: every_chain_get_PIC16F1704_freq_new
Dec 28 02:12:34 (none) local0.notice cgminer[376]: set_frequency: frequency = 537
Dec 28 02:12:34 (none) local0.notice cgminer[376]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 1
Dec 28 02:12:34 (none) local0.notice cgminer[376]: Now Set
Dec 28 02:12:34 (none) local0.notice cgminer[376]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 1
Dec 28 02:12:34 (none) local0.notice cgminer[376]: Now Set [1] Chain Address
Dec 28 02:12:35 (none) local0.notice cgminer[376]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 1
Dec 28 02:12:35 (none) local0.notice cgminer[376]: Now Set [2] Chain Address
Dec 28 02:12:36 (none) local0.notice cgminer[376]: software_set_address_chain: chain 3 has 0 ASIC, and addrInterval is 1
Dec 28 02:12:36 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 28 02:12:36 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 28 02:12:36 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 28 02:12:36 (none) local0.notice cgminer[376]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 28 02:12:36 (none) local0.notice cgminer[376]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 28 02:12:36 (none) local0.notice cgminer[376]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 28 02:12:36 (none) local0.notice cgminer[376]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 28 02:12:36 (none) local0.notice cgminer[376]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 28 02:12:36 (none) local0.notice cgminer[376]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 28 02:12:36 (none) local0.notice cgminer[376]: 0 calibration_sensor_offset_chain
Dec 28 02:12:36 (none) local0.notice cgminer[376]: chain:0 local:27 remote:32
Dec 28 02:12:36 (none) local0.warn cgminer[376]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 28 02:12:37 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -5,
Dec 28 02:12:37 (none) local0.notice cgminer[376]: chain:0 local:27 remote:27
Dec 28 02:12:37 (none) local0.warn cgminer[376]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 28 02:12:37 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -5,
Dec 28 02:12:37 (none) local0.notice cgminer[376]: 1 calibration_sensor_offset_chain
Dec 28 02:12:38 (none) local0.notice cgminer[376]: chain:1 local:26 remote:31
Dec 28 02:12:38 (none) local0.warn cgminer[376]: Chain 1 set_temperature_offset_value_chain_sensor
Dec 28 02:12:38 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -5,
Dec 28 02:12:38 (none) local0.notice cgminer[376]: chain:1 local:26 remote:25
Dec 28 02:12:38 (none) local0.warn cgminer[376]: Chain 1 set_temperature_offset_value_chain_sensor
Dec 28 02:12:38 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -4,
Dec 28 02:12:38 (none) local0.notice cgminer[376]: 2 calibration_sensor_offset_chain
Dec 28 02:12:39 (none) local0.notice cgminer[376]: chain:2 local:26 remote:31
Dec 28 02:12:39 (none) local0.warn cgminer[376]: Chain 2 set_temperature_offset_value_chain_sensor
Dec 28 02:12:39 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -5,
Dec 28 02:12:39 (none) local0.notice cgminer[376]: chain:2 local:26 remote:26
Dec 28 02:12:39 (none) local0.warn cgminer[376]: Chain 2 set_temperature_offset_value_chain_sensor
Dec 28 02:12:40 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -5,
Dec 28 02:12:40 (none) local0.warn cgminer[376]: Chain 0 set_temperature_offset_value_chain
Dec 28 02:12:40 (none) local0.warn cgminer[376]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 28 02:12:40 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : -5,
Dec 28 02:12:40 (none) local0.warn cgminer[376]: Chain 1 set_temperature_offset_value_chain
Dec 28 02:12:40 (none) local0.warn cgminer[376]: Chain 1 set_temperature_offset_value_chain_sensor
Dec 28 02:12:40 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : -4,
Dec 28 02:12:40 (none) local0.warn cgminer[376]: Chain 2 set_temperature_offset_value_chain
Dec 28 02:12:40 (none) local0.warn cgminer[376]: Chain 2 set_temperature_offset_value_chain_sensor
Dec 28 02:12:41 (none) local0.notice cgminer[376]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : -5,
Dec 28 02:12:41 (none) local0.notice cgminer[376]: frequency = '537'
Dec 28 02:12:41 (none) local0.notice cgminer[376]: dev.timeout = 562356 us
Dec 28 02:12:41 (none) local0.notice cgminer[376]: open_core_chain
Dec 28 02:12:41 (none) local0.notice cgminer[376]: open_core_chain
Dec 28 02:12:41 (none) local0.notice cgminer[376]: open_core_chain
Dec 28 02:12:41 (none) local0.notice cgminer[376]: open_core_chain
Dec 28 02:12:44 (none) local0.err cgminer[376]: cgminer time error total_secs = 1514427164.591052 last_total_secs = 1.000000
Dec 28 02:12:54 (none) local0.warn cgminer[376]: Waiting for work to be available from pools.
Dec 28 02:13:44 (none) local0.err cgminer[376]: No servers were found that could be used to get work from.
Dec 28 02:13:44 (none) local0.err cgminer[376]: Please check the details from the list below of the servers you have input
Dec 28 02:13:44 (none) local0.err cgminer[376]: Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
Dec 28 02:13:44 (none) local0.warn cgminer[376]: Pool: 0 URL: stratum+tcp://x11.eu.nicehash.com:3336 User: xxxxx.miner2 Password: x
Dec 28 02:13:44 (none) local0.warn cgminer[376]: Pool: 1 URL: stratum+tcp://x11.eu.nicehash.com:3336 User: xxxxx.miner2 Password: x
Dec 28 02:13:44 (none) local0.warn cgminer[376]: Pool: 2 URL: stratum+tcp://x11.eu.nicehash.com:3336 User: xxxxx.miner2 Password: x
Dec 28 02:13:44 (none) local0.err cgminer[376]: No servers could be used! Exiting.
Dec 28 02:13:50 (none) local0.err cgminer: Miner compile time: Mon Nov 20 17:06:56 CST 2017 type: Antminer D3
Dec 28 02:13:50 (none) local0.warn cgminer: Started cgminer 4.9.0
Dec 28 02:13:50 (none) local0.warn cgminer[8550]: bitmain_DASH_init
Dec 28 02:13:50 (none) local0.err cgminer[8550]: FAN1 too slow ...
Dec 28 02:13:50 (none) local0.err cgminer[8550]: FAN2 too slow ...
Dec 28 02:13:51 (none) local0.err cgminer[8550]: FAN1 too slow ...
Dec 28 02:13:51 (none) local0.err cgminer[8550]: FAN2 too slow ...
Dec 28 02:13:51 (none) local0.err cgminer[8550]: FAN1 too slow ...
Dec 28 02:13:52 (none) local0.err cgminer[8550]: FAN1 too slow ...
Dec 28 02:13:52 (none) local0.err cgminer[8550]: FAN1 too slow ...
Dec 28 02:13:53 (none) local0.err cgminer[8550]: FAN1 too slow ...
Dec 28 02:13:53 (none) local0.err cgminer[8550]: FAN1 too slow ...
Dec 28 02:13:54 (none) local0.err cgminer[8550]: FAN1 too slow ...
Dec 28 02:13:54 (none) local0.err cgminer[8550]: FAN1 too slow ...
Dec 28 02:13:55 (none) local0.warn cgminer[8550]: check_fan_speed OK
Dec 28 02:13:55 (none) local0.notice cgminer[8550]: detected at /sys/class/gpio/gpio51/value chain 0
Dec 28 02:13:55 (none) local0.notice cgminer[8550]: detected at /sys/class/gpio/gpio48/value chain 1
Dec 28 02:13:55 (none) local0.notice cgminer[8550]: detected at /sys/class/gpio/gpio47/value chain 2
Dec 28 02:13:55 (none) local0.notice cgminer[8550]: detect total chain num 3
Dec 28 02:13:55 (none) local0.notice cgminer[8550]: i2c init ok
Dec 28 02:13:55 (none) local0.notice cgminer[8550]: check_whether_need_update_pic_program
Dec 28 02:13:56 (none) local0.notice cgminer[8550]: reset_PIC16F1704_pic_new ok
Dec 28 02:13:57 (none) local0.notice cgminer[8550]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 28 02:13:57 (none) local0.notice cgminer[8550]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 28 02:13:58 (none) local0.notice cgminer[8550]: reset_PIC16F1704_pic_new ok
Dec 28 02:13:59 (none) local0.notice cgminer[8550]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 28 02:13:59 (none) local0.notice cgminer[8550]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 28 02:14:00 (none) local0.notice cgminer[8550]: reset_PIC16F1704_pic_new ok
Dec 28 02:14:01 (none) local0.notice cgminer[8550]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 28 02:14:01 (none) local0.notice cgminer[8550]: get_PIC16F1704_software_version_new ok, version = 0x81
Dec 28 02:14:01 (none) local0.notice cgminer[8550]: every_chain_reset_PIC16F1704_pic_new
Dec 28 02:14:02 (none) local0.notice cgminer[8550]: reset_PIC16F1704_pic_new ok
Dec 28 02:14:04 (none) local0.notice cgminer[8550]: reset_PIC16F1704_pic_new ok
Dec 28 02:14:05 (none) local0.notice cgminer[8550]: reset_PIC16F1704_pic_new ok
Dec 28 02:14:05 (none) local0.notice cgminer[8550]: every_chain_jump_from_loader_to_app_PIC16F1704_new
Dec 28 02:14:06 (none) local0.notice cgminer[8550]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 28 02:14:06 (none) local0.notice cgminer[8550]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 28 02:14:07 (none) local0.notice cgminer[8550]: jump_from_loader_to_app_PIC16F1704_new ok
Dec 28 02:14:07 (none) local0.notice cgminer[8550]: every_chain_enable_PIC16F1704_dc_dc_new
Dec 28 02:14:07 (none) local0.notice cgminer[8550]: pic_heart_beat_func_new
Dec 28 02:14:08 (none) local0.notice cgminer[8550]: enable_PIC16F1704_dc_dc_new ok
Dec 28 02:14:08 (none) local0.notice cgminer[8550]: enable_PIC16F1704_dc_dc_new ok
Dec 28 02:14:08 (none) local0.notice cgminer[8550]: enable_PIC16F1704_dc_dc_new ok
Dec 28 02:14:09 (none) local0.notice cgminer[8550]: reset_all_hash_board
Dec 28 02:14:09 (none) local0.notice cgminer[8550]: tty_init
Dec 28 02:14:09 (none) local0.notice cgminer[8550]: tty_init_chain
Dec 28 02:14:09 (none) local0.notice cgminer[8550]: tty_init_chain chainid = 0
Dec 28 02:14:09 (none) local0.err cgminer[8550]: create rx read thread for chain 0 ok
Dec 28 02:14:09 (none) local0.notice cgminer[8550]: Start A New Asic Response.Chain Id:[0]
Dec 28 02:14:10 (none) local0.err cgminer[8550]: create tx read thread for chain 0 ok
Dec 28 02:14:10 (none) local0.notice cgminer[8550]: open device over
Dec 28 02:14:10 (none) local0.notice cgminer[8550]: tty_init_chain
Dec 28 02:14:10 (none) local0.notice cgminer[8550]: tty_init_chain chainid = 1
Dec 28 02:14:10 (none) local0.err cgminer[8550]: create rx read thread for chain 1 ok
Dec 28 02:14:10 (none) local0.notice cgminer[8550]: Start A New Asic Response.Chain Id:[1]
Dec 28 02:14:10 (none) local0.err cgminer[8550]: create tx read thread for chain 1 ok
Dec 28 02:14:10 (none) local0.notice cgminer[8550]: open device over
Dec 28 02:14:10 (none) local0.notice cgminer[8550]: tty_init_chain
Dec 28 02:14:10 (none) local0.notice cgminer[8550]: tty_init_chain chainid = 2
Dec 28 02:14:10 (none) local0.err cgminer[8550]: create rx read thread for chain 2 ok
Dec 28 02:14:10 (none) local0.notice cgminer[8550]: Start A New Asic Response.Chain Id:[2]
Dec 28 02:14:10 (none) local0.err cgminer[8550]: create tx read thread for chain 2 ok
Dec 28 02:14:10 (none) local0.notice cgminer[8550]: open device over
Dec 28 02:14:10 (none) local0.notice cgminer[8550]: tty_init_chain
Dec 28 02:14:10 (none) local0.notice cgminer[8550]: open device over
Dec 28 02:14:10 (none) local0.notice cgminer[8550]: check_every_chain_asic_number
Dec 28 02:14:11 (none) local0.warn cgminer[8550]: check_asic_reg: Chain0 has 60 ASICs
Dec 28 02:14:11 (none) local0.warn cgminer[8550]: check_asic_reg: Chain1 has 60 ASICs
Dec 28 02:14:11 (none) local0.warn cgminer[8550]: check_asic_reg: Chain2 has 60 ASICs
Dec 28 02:14:12 (none) local0.notice cgminer[8550]: calculate_address_interval: temp_asic_number = 64, addrInterval = 1
Dec 28 02:14:12 (none) local0.notice cgminer[8550]: calculate_address_interval: CHIP_OFFSET = 0x04000000, CORE_OFFSET = 0x00800000
Dec 28 02:14:12 (none) local0.notice cgminer[8550]: set_ticket_mask ticket_mask = 0x0000001b
Dec 28 02:14:12 (none) local0.notice cgminer[8550]: every_chain_get_PIC16F1704_freq_new
Dec 28 02:14:14 (none) local0.notice cgminer[8550]: set_frequency: frequency = 537
Dec 28 02:14:14 (none) local0.notice cgminer[8550]: software_set_address_chain: chain 0 has 60 ASIC, and addrInterval is 1
Dec 28 02:14:14 (none) local0.notice cgminer[8550]: Now Set
Dec 28 02:14:15 (none) local0.notice cgminer[8550]: software_set_address_chain: chain 1 has 60 ASIC, and addrInterval is 1
Dec 28 02:14:15 (none) local0.notice cgminer[8550]: Now Set [1] Chain Address
Dec 28 02:14:16 (none) local0.notice cgminer[8550]: software_set_address_chain: chain 2 has 60 ASIC, and addrInterval is 1
Dec 28 02:14:16 (none) local0.notice cgminer[8550]: Now Set [2] Chain Address
Dec 28 02:14:17 (none) local0.notice cgminer[8550]: software_set_address_chain: chain 3 has 0 ASIC, and addrInterval is 1
Dec 28 02:14:17 (none) local0.notice cgminer[8550]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 28 02:14:17 (none) local0.notice cgminer[8550]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 28 02:14:17 (none) local0.notice cgminer[8550]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 28 02:14:17 (none) local0.notice cgminer[8550]: enable_read_temperature_from_asic_chain: reg_value = 0x07007a61
Dec 28 02:14:17 (none) local0.notice cgminer[8550]: select_core_to_check_temperature: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 28 02:14:17 (none) local0.notice cgminer[8550]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 28 02:14:17 (none) local0.notice cgminer[8550]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 28 02:14:17 (none) local0.notice cgminer[8550]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 28 02:14:17 (none) local0.notice cgminer[8550]: select_core_to_check_temperature_chain: diode_mux_sel = 4, vdd_mux_sel = 0
Dec 28 02:14:17 (none) local0.notice cgminer[8550]: 0 calibration_sensor_offset_chain
Dec 28 02:14:17 (none) local0.notice cgminer[8550]: chain:0 local:44 remote:43
Dec 28 02:14:17 (none) local0.warn cgminer[8550]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 28 02:14:17 (none) local0.notice cgminer[8550]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 01,
Dec 28 02:14:17 (none) local0.notice cgminer[8550]: 1 calibration_sensor_offset_chain
Dec 28 02:14:18 (none) local0.notice cgminer[8550]: chain:1 local:42 remote:42
Dec 28 02:14:18 (none) local0.warn cgminer[8550]: Chain 1 set_temperature_offset_value_chain_sensor
Dec 28 02:14:18 (none) local0.notice cgminer[8550]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : 00,
Dec 28 02:14:18 (none) local0.notice cgminer[8550]: 2 calibration_sensor_offset_chain
Dec 28 02:14:18 (none) local0.notice cgminer[8550]: chain:2 local:45 remote:44
Dec 28 02:14:18 (none) local0.warn cgminer[8550]: Chain 2 set_temperature_offset_value_chain_sensor
Dec 28 02:14:19 (none) local0.notice cgminer[8550]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : 01,
Dec 28 02:14:19 (none) local0.warn cgminer[8550]: Chain 0 set_temperature_offset_value_chain
Dec 28 02:14:19 (none) local0.warn cgminer[8550]: Chain 0 set_temperature_offset_value_chain_sensor
Dec 28 02:14:19 (none) local0.notice cgminer[8550]: set_temperature_offset_value_chain_sensor: Chain0 Sensor0 temp offset : 01,
Dec 28 02:14:19 (none) local0.warn cgminer[8550]: Chain 1 set_temperature_offset_value_chain
Dec 28 02:14:19 (none) local0.warn cgminer[8550]: Chain 1 set_temperature_offset_value_chain_sensor
Dec 28 02:14:19 (none) local0.notice cgminer[8550]: set_temperature_offset_value_chain_sensor: Chain1 Sensor0 temp offset : 00,
Dec 28 02:14:19 (none) local0.warn cgminer[8550]: Chain 2 set_temperature_offset_value_chain
Dec 28 02:14:19 (none) local0.warn cgminer[8550]: Chain 2 set_temperature_offset_value_chain_sensor
Dec 28 02:14:20 (none) local0.notice cgminer[8550]: set_temperature_offset_value_chain_sensor: Chain2 Sensor0 temp offset : 01,
Dec 28 02:14:20 (none) local0.notice cgminer[8550]: frequency = '537'
Dec 28 02:14:20 (none) local0.notice cgminer[8550]: dev.timeout = 562356 us
Dec 28 02:14:20 (none) local0.notice cgminer[8550]: open_core_chain
Dec 28 02:14:20 (none) local0.notice cgminer[8550]: open_core_chain
Dec 28 02:14:20 (none) local0.notice cgminer[8550]: open_core_chain
Dec 28 02:14:20 (none) local0.notice cgminer[8550]: open_core_chain
Dec 28 02:14:23 (none) local0.err cgminer[8550]: cgminer time error total_secs = 1514427263.549573 last_total_secs = 1.000000
Dec 28 02:14:33 (none) local0.warn cgminer[8550]: Waiting for work to be available from pools.