I already asked but they said that my card (PowerColor RX580 8G Hynix 2 fans) is bad around 850 max. At this time, I think don't have good timing trap for this card.
They do. Hynix is not such a bad memory.
I have a bunch of RX 570 4GB cards with different Hynix memory types and they all run between 970 and 980 h/s @1200/2000.
Most can be bumped well over 1k h/s, but it's not very effective consumption wise.
All you need is the right custom made strap that's all, which you can get online for the right price i guess or if someone wants to make them for you.
Maybe the 580 8GB ones can even push 1.2k if Wolf is behind the wheel, but i haven't gotten that far yet, most i can push out of Hynix memory is about 1060 h/s, but you need higher voltage for that, mostly beyond 920mV.
Same story with Micron & Elpida memory, you just need a good strap.
I prefere keeping them at 1200/2000@860-880mV, runs cool and power efficient
^^^ Some users claim sgminer-gm can put a Hynix card over 1k, I think wolf claims 1.2k but he's a special case. I recommend the MSI Armor RX580-8GB (Samsung) for use with Claymore's miner, you'll do 1k no problem with the ubermix straps and it's also the cheapest card to buy.
Carocus might want to try this Hynix strap, it's faster than the 1500 strap and he should be able to get 900+ H/s on that Gigabyte.
Hynix:
Carocus might want to try this Hynix strap, it's faster than the 1500 strap and he should be able to get 900+ H/s on that Gigabyte.
Hynix:
Code:
777000000000000022AA1C00B56A6D46C0551017BE8E060C006AE6000C081420EA8900AB030000001B162C31C0313F17
They do. Hynix is not such a bad memory.
I have a bunch of RX 570 4GB cards with different Hynix memory types and they all run between 970 and 980 h/s @1200/2000.
Most can be bumped well over 1k h/s, but it's not very effective consumption wise.
All you need is the right custom made strap that's all, which you can get online for the right price i guess or if someone wants to make them for you.
Maybe the 580 8GB ones can even push 1.2k if Wolf is behind the wheel, but i haven't gotten that far yet, most i can push out of Hynix memory is about 1060 h/s, but you need higher voltage for that, mostly beyond 920mV.
Same story with Micron & Elpida memory, you just need a good strap.
I prefere keeping them at 1200/2000@860-880mV, runs cool and power efficient