Re: [ANN] dstm's ZCash / Equihash Nvidia Miner v0.5.7 (Linux / Windows)
Testing this right now with 6x 1060 6gb OC - a rig i use for testing.
Normally running claymore on dagger getting a nice 22 mh/s.
Getting this as an average:
GPU1 46C Sol/s: 300.0 Sol/W: 4.14 Avg: 296.6 I/s: 158.8 Sh: 0.25 1.00 31
Does anybody have sol/s rates for a 1060 to see where if this could do better?
Also, what do the +++ on the right mean?
Normally running claymore on dagger getting a nice 22 mh/s.
Getting this as an average:
GPU1 46C Sol/s: 300.0 Sol/W: 4.14 Avg: 296.6 I/s: 158.8 Sh: 0.25 1.00 31
Does anybody have sol/s rates for a 1060 to see where if this could do better?
Also, what do the +++ on the right mean?
I have a Hynix impaired 3GB EVGA single fan 1060 mini,
. I have forced P0 mode for the memory using the Nvidia inspector utility.While I get 19.7 MH for ETH, I get 317 S/s average for Zcash. ETH settings are not Optimal for ZEC which is more GPU intensive.
The compromise is power eff%. I am running at 90% TDP to achieve a 80% Mem controller utilization with 150 Mhz OC for both MEM and GPU. The mem OC seems to do little other than give me headroom to use the PC while it mines. Stock config gives about 290 Sol/S with P0 wait state mode enabled.
The +++ indicates u got 3 shares in the last 20 sec or so (update display time)
Here's my first 11 hours on Flypool.
https://mega.nz/#!UXZ0kJLR!OM-sB5HPtc9KYZsvcLvFvYpH3N3LmZOHMaeuxYlq5yI