Re: Arctic Coin (ARC), No premine, Evolution over 1 year
Hello Sergejnoob,
I am really new at this and just about to stop trying setting up this Arctic Masternode in Vultr. If you are so inclined to answer some questions it would be appreciated, if not I understand.
When setting up server in "Vultr" all the Youtube videos say "pick a location" then use "Ubunto" I have a new computer running Windows 10, OS manufacture "Microsoft Corporation" System Manufacture, MSI.
When I read what "Ubunto" is, it says for a "Linux" system. I thought "linux" was completely different from Windows.
I followed this guy's instructions on Youtube https://www.youtube.com/watch?v=5H9eEwgTuoA and everything worked up to the point of connecting the VPS using Putty.
When I get to mkdir ~/arcticcoin, it always say "no directory found".
I have tried that command line in many different forms and it still does not work.
Also this line I question, even though I never really got to it, "wget https://github.com/ArcticCore/arcticcoin/releases/download/v0.12.1.2/arcticcore-0.12.2-linux64.tar.gz" this says linux 64 when I have Windows 64.
Can you tell me where I went wrong?
Wiling to donate $50 of bitcoin to you if you help me set this up!
Thank you
I am really new at this and just about to stop trying setting up this Arctic Masternode in Vultr. If you are so inclined to answer some questions it would be appreciated, if not I understand.
When setting up server in "Vultr" all the Youtube videos say "pick a location" then use "Ubunto" I have a new computer running Windows 10, OS manufacture "Microsoft Corporation" System Manufacture, MSI.
When I read what "Ubunto" is, it says for a "Linux" system. I thought "linux" was completely different from Windows.
I followed this guy's instructions on Youtube https://www.youtube.com/watch?v=5H9eEwgTuoA and everything worked up to the point of connecting the VPS using Putty.
When I get to mkdir ~/arcticcoin, it always say "no directory found".
I have tried that command line in many different forms and it still does not work.
Also this line I question, even though I never really got to it, "wget https://github.com/ArcticCore/arcticcoin/releases/download/v0.12.1.2/arcticcore-0.12.2-linux64.tar.gz" this says linux 64 when I have Windows 64.
Can you tell me where I went wrong?
Wiling to donate $50 of bitcoin to you if you help me set this up!
Thank you
Step by Step Setup for a ARC Maternode
Here you can create your own Virutal Linux Server https://www.vultr.com/?ref=7160524 2,99$ per month - Payment Methods: PayPal - CreditCard - Bitcoin
Vultr is a well known and professional Cloud Hosting company!
I used #ubuntu 16.04
apt-get update
apt-get install -y build-essential software-properties-common autoconf libssl-dev libboost-dev libboost-chrono-dev libboost-filesystem-dev libboost-program options-dev libboost-system-dev libboost-test-dev libboost-thread-dev sudo automake git
add-apt-repository ppa:bitcoin/bitcoin -y
apt-get update
apt-get install libdb4.8-dev bsdmainutils libdb4.8++-dev -y
mkdir ~/arc
cd ~/arc
apt-get install wget nano -y
wget https://github.com/ArcticCore/arcticcoin/releases/download/v0.12.1.2/arcticcore-0.12.2-linux64.tar.gz
tar -xvf arcticcore-0.12.2-linux64.tar.gz
mv arcticcore-0.12.1/* ./
rm arcticcore-0.12.2-linux64.tar.gz
rm -r arcticcore-0.12.1/
cp ~/arc/bin/arcticcoind /usr/local/bin/
cp ~/arc/bin/arcticcoin-cli /usr/local/bin/
cp ~/arc/bin/arcticcoin-tx /usr/local/bin/
mkdir -p /root/.arcticcore
nano /root/.arcticcore/arcticcoin.conf
```
rpcuser=user
rpcpassword=ASecurePasswordThatYouDontNeedToRemember
server=1
```
arcticcoind -daemon
arcticcoin-cli getinfo
arcticcoin-cli getnewaddress 0
=>
Save the output of the last command, this is the you'll send your ARC to.
Send EXACTLY 1000 ARC this (`1000.01` from cryptopia)
Then list transaction:
arcticcoin-cli listtransactions
and get the `txid`
```
arcticcoin-cli getbalance
=> 1000.00000000
```
```
arcticcoin-cli goldminenode genkey
=>
arcticcoin-cli stop
nano ~/.arcticcore/arcticcoin.conf
```
And change the file into:
```
server=1
listen=1
daemon=1
goldminenode=1
goldminenodeprivkey=
externalip=
```
Then:
```
arcticcoind -daemon
arcticcoin-cli goldminenode outputs
=> {
"xxxx": "IDX"
}
```
Wait until your tx has 15 transactions (check with `arcticcoin-cli listtransactions`)
Note the "IDX" value and open the file `~/.arcticcore/goldminenode.conf`.
nano ~/.arcticcore/goldminenode.conf
Add the following line:
```
mn1 :7209
```
Then `arcticcoin-cli goldminenode start`.
Check your goldmine is connected by doing:
```
arcticcoin-cli goldminenode list | grep
"TXID-IDX": "PRE_ENABLED"
```
After 20-30 min you should see:
```
arcticcoin-cli goldminenode list | grep
"AAAAA-B": "ENABLED"
```
Check http://www.vultr.com/?ref=7160524 for good hosting prices... dont trust services where you dont own the private keys!!
Have Fun with your Masternode !
Here you can create your own Virutal Linux Server https://www.vultr.com/?ref=7160524 2,99$ per month - Payment Methods: PayPal - CreditCard - Bitcoin
Vultr is a well known and professional Cloud Hosting company!
I used #ubuntu 16.04
apt-get update
apt-get install -y build-essential software-properties-common autoconf libssl-dev libboost-dev libboost-chrono-dev libboost-filesystem-dev libboost-program options-dev libboost-system-dev libboost-test-dev libboost-thread-dev sudo automake git
add-apt-repository ppa:bitcoin/bitcoin -y
apt-get update
apt-get install libdb4.8-dev bsdmainutils libdb4.8++-dev -y
mkdir ~/arc
cd ~/arc
apt-get install wget nano -y
wget https://github.com/ArcticCore/arcticcoin/releases/download/v0.12.1.2/arcticcore-0.12.2-linux64.tar.gz
tar -xvf arcticcore-0.12.2-linux64.tar.gz
mv arcticcore-0.12.1/* ./
rm arcticcore-0.12.2-linux64.tar.gz
rm -r arcticcore-0.12.1/
cp ~/arc/bin/arcticcoind /usr/local/bin/
cp ~/arc/bin/arcticcoin-cli /usr/local/bin/
cp ~/arc/bin/arcticcoin-tx /usr/local/bin/
mkdir -p /root/.arcticcore
nano /root/.arcticcore/arcticcoin.conf
```
rpcuser=user
rpcpassword=ASecurePasswordThatYouDontNeedToRemember
server=1
```
arcticcoind -daemon
arcticcoin-cli getinfo
arcticcoin-cli getnewaddress 0
=>
Save the output of the last command, this is the you'll send your ARC to.
Send EXACTLY 1000 ARC this (`1000.01` from cryptopia)
Then list transaction:
arcticcoin-cli listtransactions
and get the `txid`
```
arcticcoin-cli getbalance
=> 1000.00000000
```
```
arcticcoin-cli goldminenode genkey
=>
arcticcoin-cli stop
nano ~/.arcticcore/arcticcoin.conf
```
And change the file into:
```
server=1
listen=1
daemon=1
goldminenode=1
goldminenodeprivkey=
externalip=
```
Then:
```
arcticcoind -daemon
arcticcoin-cli goldminenode outputs
=> {
"xxxx": "IDX"
}
```
Wait until your tx has 15 transactions (check with `arcticcoin-cli listtransactions`)
Note the "IDX" value and open the file `~/.arcticcore/goldminenode.conf`.
nano ~/.arcticcore/goldminenode.conf
Add the following line:
```
mn1 :7209
```
Then `arcticcoin-cli goldminenode start`.
Check your goldmine is connected by doing:
```
arcticcoin-cli goldminenode list | grep
"TXID-IDX": "PRE_ENABLED"
```
After 20-30 min you should see:
```
arcticcoin-cli goldminenode list | grep
"AAAAA-B": "ENABLED"
```
Check http://www.vultr.com/?ref=7160524 for good hosting prices... dont trust services where you dont own the private keys!!
Have Fun with your Masternode !