Recently tested Bminer: agree, the performance is just amazing. More than 15% faster than EWBF on the same cards. Up to stable 320 Sol/s for 1060 3GB and 600 Sol/s for G1 1080.
But before mass moving to Bminer I have two questions:
1. What the "firmware.bin" file is for? Does Bminer reflash your video cards? Can this affect guarantee?
2. Why it keeps connections not only to the specified pool but two more hosts nowhere mentioned?
But before mass moving to Bminer I have two questions:
1. What the "firmware.bin" file is for? Does Bminer reflash your video cards? Can this affect guarantee?
2. Why it keeps connections not only to the specified pool but two more hosts nowhere mentioned?
Good questions. Would also like to know an answer to those before mass moving to bminer.
I don't think these questions have actually been definitely answered? I see speculation on #2, and nothing on #1. Thanks.
1. It contains runtime and licensing information. It does not flash the video card and will not affect the warranty.
2. They are related to devfee.
If your bminer need 2 constant connection to get dev fee then sorry you do it wrong!!! way not do same thing like claymore in his program aka connect to pool what you want use only when dev fee it meant to be collect not to keep 100% extra connection in your case after 4.0 ver x2
& that was make me to say pass but nop thx ... special ip what was there was very let say strange ...Tcpview done by sysinternals it reveal easy all network connection use
about speed your bminer it do same speed like dtms but it push power with extra 2W more that it suppose to be in stead 86 it make to be 88 or 88 to be 90 & that i seen in more heat to, other way is very stable, same amount of reject like dtms from time to time 1% very rare ...
cheers