sorry for disturbing, I've just got my a4+ today, I've checked in the overview, I see it's as below:
A4+
Hw Version G19
DNA 0x1488076484c2c1
MAC Addr 50:6c:be:08:76:9f
Build Date Wed Nov 22 09:30:31 CST 2017
May I know which firmware is the most stable one? or if there is any other newer and stable firmware available please? should I upgrade it?. Thanks.
According to inno they keep screwing up the firmware and it burns out the thing, so at least Dec 20th firmware.
just remember the root password changed to t1t2t3a5 with the Dec 20th firmware.
I have some running Dec20th and Dec29th. both seem similarly okay.
Thx Gazdac2
I rebooted and waited 5 min, then I telneted in ran the command, this is what I get.
(none) login: root
Password:
root@miner~:
ps|grep innominer
844 root 0:00 syslogd -f /etc/syslog.conf -O /tmp/log/innominer.log -s 1
024 -b 5
1181 root 0:00 grep innominer
root@miner~:
I also did a test, ran the same command after another reboot (thx for the command) at about 30 sec after the start, when the fan speed reduced (just under 3min), and at 5 min. Prior to 5 min, I got the string of codes like yours with the pool information, but after 5 min, I get the same code as above.
Yep, that's bad. Mine never actually exits, it just loops around if it fails. Sometimes forever... but never actually closes.
you can watch the logs with tail, or go further back in the log with -500 or -10000 or whatever to see when it stopped.
whenever you "save" the pools on the webui I believe it rebuilds the run.sh you could try that. I think it also runs a different string if you have 2 pools instead of one. save one pool and try, save 2 pools ( even if the same) and try. and if not... then digging through those config files and python files.