how i can modify 900mv?
Afterburner, Overdriventool,...
how??
i try to use msi afterburner without success
today i got 2 new itx pulse saphire rx 570 and stock bios does 28.5 mh eth how is possible???
is voltage locker or unlocked in Afterburner?
change voltage and also change the clocks and apply together in AFB. that worked for me.
locked and i cant unlock cause i have blockchain drivers
I am unsure if it's tied to blockchain drivers as I have it unlocked on mine (using 8/8/17 driver).
It was locked earlier using same drivers. The only thing that changed this I can reckon is I flashed one BIOS on one of my cards with just memory shift mod without touching on the clocks/volts. Usually I have to patch the rx 570 cards but it wasn't necessary on this one.
If AFB is locked then use overdriveNTool. You will have to use make adjustments > save to profile > hit reset all > apply profile. Should work then.
Note: If you have modded BIOS and higher volts in the memory section (300,1000 or 2000 Mhz) the card picks up that voltage even if you under volted on the core.