Hello,
I built a very crude SRR circuitry for a Raspberry Pi to remotely reset a rig or switch it on/off (The raspberry Pi basically controls an optocoupler connected to the reset and poweron pins of the mobo).
For the moment the Raspberry Pi just detect if port 22 is open on the rig. If not, it assumes that the rig is not reachable by SSH and reset the rig.

I see that there is an SRR scrips on nvOC, that looks much more sophisticated than what I am doing. Unfortunately there is no mention of the watchdog software to run on the Raspberry Pi.
Anyone can give me a pointer to the software to run on the Raspberry Pi.

Cheers