I have a 19port 40A Eyeboot hub, because that was the only thing I could get my hands on at the time. Expensive as it is, it wasn't the best buy, mostly because I cannot run all 11 full blast, I think it is the powersupply that is halting. If I run all at 900Mhz and say each draws 15W, it is a total current of 33A. That doesn't seem to fly, and MLDs start to drop out. But 4x900Mhz+7x832Mhz works just ok, and that's fine too. I don't have wattmeter to check how much I am actually consuming.
I was curious about the amps being drawn on the ML2 running at 900Mhz and 5.10Mhs and today i received a little USB inline meter. To my surprise the sole unit I have right now says that it is drawing about 4.6v and 2.5 amp - did not expect it to be that high on the amperage.
I have a couple of those Blue Block Erupter 49 port hubs and a couple of 550w ATX power supplies. They claim the hubs are "new version" and "now come with a 70 amp fuse" (before it was 50 amp) ... I was hoping I would be able to run all that I have coming on pre-order on one hub but at 2.5 amps I don't see that happening.
Photo Of Meter In Line