Ninjastic
PostEdited versionsQuotes to this post
Post
Topic
Board Mining (Altcoins)
Re: Official FutureBit Moonlander 2 Driver and Support Thread
by
JustAnotherPLT
on 08/01/2018, 17:52:47 UTC
Quote from: neochi on January 08, 2018, 04:32:17 PM
Quote from: JustAnotherPLT on January 08, 2018, 04:27:13 PM
Quote from: neochi on January 08, 2018, 04:15:28 PM
What HUB you use? What show lsusb on you raspberry ?

I had the issue that the plug was not put is tight to the hub.  Roll Eyes

I’m using https://www.amazon.com/Plugable-port-USB-3-0-hub/dp/B008ZGKWQI and have tried all ports on it.


http://i67.tinypic.com/16m22y0.jpg


Please go to you shell and execute "lsusb" with connected and aktiv hub and past the output here.

Did you do in the setup the following commands?

sudo apt-get update
sudo apt.get upgrade
sudo rpi-update


Thanks

I just reran the whole installation using the commands you provided before the ones on the first page. It still cannot find the moonlander.

Here is the lsusb
http://i65.tinypic.com/22nvk4.jpg

I know the issue is with the hub considering it recognizes the moonlander when directly plugged in. So the question now becomes does RPI3 not support a USB hub that is 3.0? Where could I find drivers to help this situation?