Can someone please help, I have these card, MSI RX 580 ARMOR 8GB OC with Samsung memory, I copied straps 1:1750 to 1:2000 and 2:1750 to 2:2000, that pushed my stock hash from 19 to 24.5, haven't overclocked as yet. Hash rate still low though, it could be very helpful if someone knowledgeable can help.
Here is my original rom:
https://mega.nz/#!jdxDnBRL!kJokqryH6FtSMfQiyIlovZxmTUcqRlgYzVjvmK_3Rts
Thanks
i just help my friend tune his MSI card which is the same as you. can go 30.6m with others strap. The first thing you would like to you is using ddu to uninstall the driver and install the blockchain driver.
Finaly got my card in. The same as mentioned above. MSI RX580 Armor 8GB Samsung. Now hashing without memory errors at 30.2 Mh/s and 650 Mh/s SAI. The memory straps improved the stock hashrate, but tuning the memory clock and GPU clock improved things from +/- 27 Mh/s up to the current values. Power usage is about 88 Watt GPU-z, +/- 110 Watt from the wall in dual mining mode.
I just bought a couple of RX580's. Is it still possible to get these to run with Claymore under Linux?
It seems that the Linux software is too new for any driver software that I can get my hands on.
Drivers keep complaining that my Xorg is too new, or that dkms code cannot be installed because some structure member no longer exists in the kernel headers, etc. The only driver that installed fine, the amdgpu-pro-17.50-511655.tar.xz and the AMD-APP-SDK 3, do not seem to be supported by Claymore.
Just having a tough time..
-turgut
Yes you can. I've tryed Ubuntu myself, but hash rate is down by 4 Mh/s. This is with the most recent mining driver from AMD. Also power usage is higher than on Windows and I can't overclock/undervolt. I would use Linux if the performance was a tie or even somewhat less (this is my first Windows install in years), but it just isn't worth it at the moment.